ANY ANGLE BI-METALLIC THERMOMETER High accuracy range of Any Angle Thermometers designed for process, petrochemical and hygienic applications. Standard features include, fast, accurate and repeatable readings, fully adjustable display head, user calibration, all stainless steel construction. Models are available in two accuracy classes to meet both HVAC and industrial process applications. The lower accuracy 1.5% fsd units are designed to meet the requirements of the HVAC market whereas the 1.0% higher accuracy units are designed for harsher industrial applications such as offshore Oil & Gas. In addition to the standard ranges and configurations, custom units can be manufactured to meet most requirements. A full range of screwed and flanged Thermowells are available in a wide choice of materials and configurations. Case 304 Stainless Steel Stem Diameter 6mm, 8mm, 10mm, 12.7mm diameters in 316L Stainless Steel Bezel 304 Stainless Steel Standard Stem Lengths 100mm, 150mm, 225mm, 300mm, 400mm Options: Other lengths available on request Minimum insertion length of 55mm Window 3mm Glass Window Option: Acrylic Plastic safety window Mounting Direct mounting whereby the Any Angle Head can be rotated through 360° and angled 180° from axis Fitting Plain stainless steel stem supplied with compression gland 1/2" BSP or NPT as standard, others available on request Dial White Anodised Aluminium with black markings Pointer Black Anodised Aluminium Environmental Rating IP66 as defined in EN 60 529 Standard Temperature Ranges Single Scale °C or °F -40/+60 0/100 0/150 0/200 0/300 0/400 Other ranges including higher temperatures ranges available on request Accuracy Class BT6x1 is CL:1.0 - 1.0% of FSD BT6x5 is CL:1.5 - 1.5% of FSD User Calibration External zero adjustment from rear as standard Traceability All instruments are individually calibrated and have an unique Serial Number printed on the dial. A Certificate of Conformity Traceable to National Standards is Supplied Free of Charge Certification available BS EN 10204 3.1B Material Certification Point by Point Test Certificate Safety All units are manufactured to comply with International and and other regulatory standards including PED Installation Instructions The use of thermowells is recommended in pipe work, vessels or pressurised systems above 3.5 bar, to provide protection against high pressures and to facilitate removal of the thermometer without depressurising or draining the system

Ordering Specification Size mm 100mm 150mm Stem Length 100, 150, 200, 300, 400 mm Others - state requirement Temperature Range From table or state requirement Units C, oF or oC & oF Connection Glands 1/2" NPT -1, 1/2" BSP -2, 3/4" BSP -3, 3/4" NPT -4 Others - state requirement Code Example Order C Any Angle Bi-metallic Thermometer, 100mm Dial, 1% Accuracy, 304 St St Case, 6mm stem, stem length = 200mm, range 0-100 Deg C, 1/2" NPT connection Specifications and dimensions in this leaflet, are subject to change without prior notice.