Model: 15L SMALL DIAL - LOW PRESSURE INDUSTRIAL SERVICE GAUGE The model 15L is manufactured to meet the demand for small high quality gauges designed for applications using gases, water or any liquid that does not attack brass and bronze. The one piece polycarbonate case with integral window forms a solid baffle in front of the Bourdon tube and incorporates a full diameter stainless steel blow-out back so that in the event of a tube failure through corrosion, explosion or gross over pressure any vapour or debris is vented from the back of the case. This gauge is designed for direct mounting on to the process pipe work and comes with a grey inner sleeve to give a grey colour to the side of the case. Size 63 mm & 80mm Dial diameter Dial White Anodised Aluminium marked in black finish Option: Dual scale, colour bands & sectors Customisation with Company Name & Logo also available Mounting Direct Case & Bezel One Piece Polycarbonate, Safety Pattern case Scale Ranges 0 to 25 mBar, up to 600 mBar Pressure Equivalent units of pressure / vacuum available Including inches and mm of Water or Mercury Single and dual scales are available Pressure Element Beryllium Copper Capsule, which gives the energy and precision required for accurate repeatable low pressure measurement Overload Units will withstand up to 130% of FSD Pressure Connection 1/4” BSP as Standard 1/8", 1/4” & 3/8" BSP & NPT are also available Accuracy Class CL:1 1.0% of FSD as defined in EN837-1 Temperature Operating: -20 to +90 ºC Storage: -40 up to +100 ºC Options: for lower or higher operating temperatures, please contact our Sales Office Pointer Stainless steel coloured black Movement Brass Construction Option : Viscous Damped movement to overcome the effects of minor pressure pulsations and vibrations Window One Piece Polycarbonate Environmental Rating IP54 as defined in EN 60 529 Traceability All instruments are individually calibrated and have an unique Serial Number printed on the dial. A Certificate of Conformity Traceable to National Standards is Supplied Free of Charge Certification available BS EN 10204 3.1B Material Certification Point by Point Test Certificate Safety All units are manufactured to comply with EN 837-1, S3 specification and other regulatory standards including PED. Installation instructions Refer to EN 837-2 Temperature Effect Variation in indication caused by temperature shall not exceed ± 0.04 x (t2 – t1)% of the span where: t1 is the reference ambient temperature in degrees Celsius t2 is the ambient temperature in degrees Celsius Rev-05 January 2010 Designed and Manufactured in UK. Datasheet BUD-001

Dimensions Model : 15L Model No 63mm Polycarbonate Case y 80mm Polycarbonate Case 80mm Steel Case A 68mm 86mm 83mm B 14mm 19mm 14mm Model No 63mm Polycarbonate Case 80mm Polycarbonate Case 80mm Steel Case H 13.5mm 13.5mm J 45mm 46mm Options Case : Mounting : Threads : Dials : C D 91mm 5.5mm E 36.5mm 42mm 36.5mm F 110mm 153mm 153mm G 44.5mm 51.5mm 51.5mm Weight 0.2kg g 0.3kg 0.4kg Customer Name or Logo See other Datasheets for various mountings NPT available Colour sectors Accessories For high temperature applications such as steam, see our range of syphons and adaptors. – See separate Datasheet....