Quick Start Guide Please read this manual before using the equipment

Quick Start Guide

Safety Warnings IMPORTANT: We strongly advise that individuals with pacemakers, cochlear implants, or trans-dermal electronic implants e.g., glucose monitors do not use our highvoltage test equipment under any circumstances. IMPORTANT: This product must not be used in combustible atmospheres or ATEX Hazardous Areas, such as fuel stations or in proximity to any combustible gas (and/ or oxygen concentrations exceeding normal atmosphere). All high-voltage testing equipment must be operated by suitably trained, responsible, authorised personnel only. IMPORTANT: This product can cause radio interference...

Quick Start Guide EC Declaration of Conformity We, Buckleys (UVRAL) Ltd., as sole manufacturer of the apparatus listed below, declare that the product Lab Pro2 is manufactured in conformity with the following directives: 2014/30/EU, 2014/35/EU, 2015/863/EU and 2011/65/EU (RoHS). Date: 01/07/2021 Authorised by: J P Hoveman CEO, Buckleys (UVRAL) Ltd. UKCA Declaration of Conformity We, Buckleys (UVRAL) Ltd., as sole manufacturer of the apparatus listed below, declare that the product Lab Pro2 is manufactured in conformity with the following UK legislation: Electronic Compatibility Regulations 2016,...

Maintenance The Lab Pro2 is designed for minimum maintenance by the user, however the following periodic checks/actions are recommended: The exterior of the unit should be cleaned regularly. Stubborn dirt may be removed with a moistened cloth (99% water +1% mild detergent). Mild solutions may be used to remove greasy dirt. Do not allow cleaning fluid to enter the unit. The use of other cleaning agents may lead to damage to the detector’s surface areas. Our service team will ensure your detector’s performance is within our strict tolerances and carry out a thorough inspection of the entire kit;...

Quick Start Guide Kit Contents Upon delivery of your Lab Pro2, please take the time to ensure that the kit is complete, and all components shown below are present and undamaged: Electrostatic discharge wristband Calibration certificate Mains power supply cable Stainless steel drum brush electrode 5m earth cable on reel Interconnecting lead Test probe handle and nosecone Lab Pro2 detector unit with desk stand Pointed probe electrode

Risk Assessment It the user’s responsibility to complete a risk assessment before using Buckleys equipment. The following points offer some guidance but must not be assumed to be complete or sufficient. Personal safety • Have all users been trained in the correct and safe use of the instruments? • Are they aware that the instrument produces high voltages, and can give electric shocks if used incorrectly? • Is the instrument in good condition, undamaged? Is the instrument dry? Are the accessories similarly in good condition, dry and undamaged? • Is it possible to ensure that persons with pacemakers,...

Quick Start Guide

Setup (continued) Instrument settings Switch the instrument on by pressing a. The screen displays the following information (see fig.8): A Battery level indicator (not in use) B Menu symbol C Voltage currently applied to electrode D Current draw at electrode E Output lock ON/OFF F Sensitivity threshold G Set test voltage H Sensitivity threshold graph I Handle temperature Setting interface language Press b to access the main settings menu and press d or e to scroll to Set Language and press b. Press d or e to scroll to the desired language and press b. Press c to return to the main display screen....

Quick Start Guide Basic Testing Press and hold the ON button

Basic Testing (continued)

Contact Details Manufacturer Address Buckleys House Unit G, Concept Court, Shearway Business Park, Shearway Road Folkestone, Kent CT19 4RG, UK Tel: +44 (0)1303 278888 Email: [email protected] www.buckleysinternational.com