Datasheet: ST-AC Pro' AC spark tester
1Pages

ST-AC Pro’ AC Spark Tester www.buckleysinternational.com The ST-AC Pro’ AC spark tester provides a quick and effective means of inspecting thicker coatings and linings. It is particularly useful for checking butt-welded and overlap joints on plastic fabrications. The ST-AC Pro’ can detect flaws and defects in nonconductive membranes up to 30mm in thickness and is extensively used in the petrochemical, pipeline construction, plastic and rubber manufacturing industries. Fully CE compliant, the ST-AC Pro’ is supplied with a 150mm flexible probe which is suitable for most uses. Insulated extension rods, electrodes and accessories are available for specific applications. To ensure stability of the output voltage, the maximum recommended electrode size is 150mm for all high frequency equipment. A comprehensive kit with accessories is also available – see datasheet 6000-0017 ST-AC Pro’ AC Spark Tester Complete Kit. Strong aluminium case Mains powered Adjustable output voltage Illuminated ‘output-on’ indicator 2 metre test probe handle lead 2 metre mains lead (longer lead can be supplied) Large carrying handle/desk stand Wide range of accessories available CE approved TECHNICAL SPECIFICATIONS • Output voltage range: 10-55kV peak high-frequency AC • Output frequency: 100kHz ring pulsed at 50Hz @ 50Hz mains supply • Mains voltage: 110 or 230V AC 50/60Hz • Weight (unit only): 4.05Kg • Dimensions (unit only): 175mm x 90mm x 235mm • Weight (handle): 0.6Kg • Dimensions (handle): 30cm x 8cm • Packed weight (standard kit): 6Kg • Dimensions (packed): 370mm x 360mm x 300mm • Compliant with CEN/TC 249/SC5/WG2 Testing of Welded Joints (PREN 13100-4 HV Testing) Note: Due to ongoing technical developments, all stated information is typical and is subject to change without notice or obligation. STANDARD KIT COMPRISES • ST-AC Pro’ unit with test probe handle • 150mm flexible probe • 2m mains lead • Comprehensive instruction manual ACCESSORIES AVAILABLE Drum-Brush Electrode Phosphor-Bronze Brush Electrode Nose Cone 250mm Gauze Mesh Electrode 330mm Insulated Extension Rod MidSection Pointed Probe Electrode 6005-0236 IMPORTANT: Service and repair of this product and its components MUST ONLY be undertaken by trained, approved technicians working in full accordance with Buckleys’ service guidelines. Failure to do so may expose the operator to potentially lethal voltages. Under no circumstances should anyone other than trained approved technicians attempt to dismantle or repair this product. Spark Tester Adaptor 6005-0080 330mm Insulated Extension Rod End-Section 6005-0460 * Only available to certified dealers Buckleys (UVRAL) Ltd. Buckleys House, Unit G, Concept Court, Shearway Business Park, Shearway Road, Folkestone, Kent. CT19 4RG. UK Tel: +44 (0)1303 278888 Email: sales@buckleys.co.uk Website: www.buckleysinternational.com AFTER SALES SERVICE/TECHNICAL SUPPORT All Buckleys products are manufactured under the controls established by a quality management system that meets the requirements of BS EN ISO 9001:2015 and are supplied with a one year ‘back-to-base’ warranty. The equipment is proven to be robust and reliable and will give years of service if maintained in accordance with our instructions. Annual re-calibration is recommended for the ST-AC Pro’ AC spark tester. Buckleys provide full repair and calibration facilities; offering a fast turn-around service for customers’ equipment. Advice on specific applications for all Buckleys products is available from our technical de