www.buckleysinternational.com The SGS Spark Gap Setter is a is a compact and portable instrument used to determine the output voltage of the PST100 and ST-AC100 Spark Testers The output voltage of the PST100 and ST-AC 100 can be roughly set by dividing the test voltage by 1700, the answer is in mm. e.g. 20,000 /1700 = 11.76mm. The test probe should be held at the calculated gap from a piece of earthed metal and the output voltage increased until the spark jumps the gap. KIT COMPRISES • 1x 4mm plug to crocodile clip cable • 1 x Spark Gap setter • 1 x Operation Instructions TECHNICAL SPECIFICATIONS • Weight: 0181 kg • Size: 180mm x 250mm x 30mm> Note: Due to ongoing technical developments, all stated information is typical and is subject to change without notice or obligation. AFTER SALES SERVICE / TECHNICAL SUPPORT All Buckleys products are manufactured under the controls established by a quality management system that meets the requirements of BS EN ISO 9001:2015 and are supplied with a one year ‘back-to-base’ warranty. The equipment is proven to be robust and reliable and will give years of service if maintained in accordance with our instructions. Buckleys provide full repair and calibration facilities; offering a fast turn-around service for customers’ equipment. Buckleys (UVRAL) Ltd. Buckleys House, Unit G, Concept Court, Shearway Business Park, Shearway Road, Folkestone, Kent. CT19 4RG. UK Tel: +44 (0)1303 278888 Email: [email protected] Website: www.buckleysinternational.com Advice on specific applications for all Buckleys products is available from our technical department. Contact us by telephone or e-mail using the contact d