DCCT Pro2 mains powered testers are ideal for the rapid and effective testing of porosity in non-conductive coatings. Incorporating a resettable high-speed counter, they are specifically designed for use within automated production processes. Features • Robust metal case with accessory kit to allow mounting in standard 19" rack if required • Digital control allows easy setting of output voltage, sensitivity, and timing parameters • Front panel LED indicators for power, network, HV and Alarm status • Visual and audible alarms • Suitable for in-process testing at a wide range of speeds • Can be integrated into automated testing for discrete items • Conforms with BS EN 62230 (formerly BS 5099) • Calibration Certificate Included • UKCA & CE Approved Used extensively in the manufacturing industry for checking cables, plastic sheets, battery cases, moulded components, and non-conductive coatings on steel pipes, DCCT Pro2 units can be programmed to the output voltage, sensitivity, and timing parameters of your choice. The instrument comprises a front panel power switch, interlock input, and two HV output modules, each provided with twin no-volt change-over relay outputs. The output module does not include a User Interface, and must be controlled either by a DCCT Pro2 Integral unit, or by a DCCT Pro2 Command+ station. The units are connected by a low voltage 4-wire network cable. Cable and connectors are available from Buckleys. The instrument is built into a 19" rack mountable case. Buckleys design and supply custom electrodes to suit your application -please contact us with your requirements. Specifications • Mains supply voltage: 90-250VAC (via IEC C13 "kettle plug" lead) • Output voltage range: 0.9kV - 40kV • Max. output current: <1mA (continuous) • Alarm sensitivity range: 10pA to 450pA (factory-set to 200pA) • Weight (unit): 3.9kg • Weight (packed): 7.5kg • Dimensions (unit): 421 x 203 x 88mm • Dimensions (packed): 580 x 440 x 240mm • Meter accuracy: <10kV: +/- 10V. >=10kV +/- 100V • Current meter FSD: 450pA • Maximum relative humidity: 80% non-condensing • Temperature range: 0°C - +40°C All parts available separately as accessories or spares. AFTER SALES SERVICE / TECHNICAL SUPPORT All Buckleys products are manufactured under the controls established by a quality management system that meets the requirements of BS EN ISO 9001:2015 and are supplied with a one year ‘back-to-base’ warranty. The equipment is proven to be robust and reliable and will give years of service if maintained in accordance with our instructions. Annual re-calibration is recommended. Buckleys provide full repair and calibration facilities; offering a fast turn-around service for customers’ equipment. Advice on specific applications for all Buckleys products is available from our technical department. Contact us by telephone or e-mail using the contact details below. Buckleys (UVRAL) Ltd Buckleys House, Unit G, Concept Court, Shearway Business Park, Shearway Road, Folkestone, Kent. CT19 4RG. UK Tel: +44 (0)1303 278888 Email: [email protected] Website: www.buckleysinternational.com