Catalogs >
Buckleys (UVRAL) Limited >
Datasheet: Calibration kit for the BathyCorrometer® Pro'

Datasheet: Calibration kit for the BathyCorrometer® Pro'
1Pages

Catalog excerpts

Datasheet: Calibration kit for the BathyCorrometer® Pro' - 1

BathyCorrometer® Calibration Kit www.buckleysinternational.com The Calibration Kit has been created to provide all the necessary components to enable customers to verify the accuracy of the readings on the Buckleys or Roxby BathyCorrometers® so that ‘in-house’ verification can be carried out. The process requires two areas to be checked. The Readings on the BathyCorrometer® should be 0.000 with the checker switched off and -1.900V with the checker on. Providing the readings are correct, the silver/silver chloride screw-in half cell should be checked by using K-SAT Reference Cells in a standard saltwater solution. To confirm the readings, three cells should be used, and the sea water corrosion test mixture should be made up to a 3% solution. TECHNICAL SPECIFICATIONS CalChecker Pro’ • Power supply: 3 volt battery • Battery type: alkaline CR1632 • Output voltage: -1.900 Volts • Accuracy: +/- 0.01% • Temperature coeff: 30ppm/°C • Temperature range: 0-30°C • On indicator: red LED • Connection: 5 pin plug & probe clip FEATURES • Easy to use • All kit parts can be replaced individually • Full instructions included KIT COMPRISES • CalChecker Pro’ • 3 x screw-on K-SAT reference electrode cells • Sea water corrosion test mixture • Full instructions for ‘in-house’ verification ANCILLARY PRODUCTS AVAILABLE: K-SAT Reference Cell • Electrical connection: screw fit • Output: +196mV @ 25°C vs SHE • Accuracy: ±10mV @ 25°C vs SHE • Temperature coeff: -0.64mV per/°C • Temperature range: 0 - 40 °C • Working life: up to 1 year • Dimensions: 155mm long x 25mm dia. • Packed weight (calibration kit): 1.9Kg • Dimensions (packed): 44cm x 38cm x 14cm IMPORTANT BathyCorrometer® recalibration should only be undertaken by Buckleys trained and approved technicians with access to the appropriate electrical and pressure testing equipment. Recalibration by unqualified technicians will invalidate the BathyCorrometer®’s warranty. Note: Due to ongoing technical developments, all stated information is typical and is subject to change without notice or obligation. Replacement silver/ silver chloride screw in half cell Zinc Test Block 6004-0052 Magnesium Test Block 6004-0053 Buckleys (UVRAL) Ltd. Buckleys House, Unit G, Concept Court, Shearway Business Park, Shearway Road, Folkestone, Kent. CT19 4RG. UK Tel: +44 (0)1303 278888 Email: sales@buckleys.co.uk Website: www.buckleysinternational.com AFTER SALES SERVICE / TECHNICAL SUPPORT All Buckleys products are manufactured under the controls established by a quality management system that meets the requirements of BS EN ISO 9001:2015 and are supplied with a one year ‘back-to-base’ warranty. The equipment is proven to be robust and reliable and will give years of service if maintained in accordance with our instructions. Buckleys provide full repair and calibration facilities; offering a fast turn-around service for customers’ equipment. Advice on specific applications for all Buckleys products is available from our technical d

Open the catalog to page 1