MANUFACTURERS OF SPECIALIST TEST EQUIPMENT test for defects in coatings & linings over conductive materials

AC Spark Testers Buckleys manufacture two types of spark tester which provide a quick and convenient method of testing the integrity and locating defects in a variety of coatings. Spark Testers generate AC voltages of typically between 10 and 55kV. They are used for testing thicker nonconductive coatings and linings of between 3mm and 30mm over conductive materials. Spark Testers have no audible or visual alarms to indicate a fault and rely on the operator to observe a spark jumping through a flaw in the coating material. Due to their AC high-frequency operation they can find faults in 100% coated...

The PST-100 Spark Tester is a lightweight, ergonomic, hand-held spark test pistol which provides a quick and cost-effective method of inspecting thicker coatings and linings of between 3mm and 30mm. The PST-100 creates an adjustable pulsed-ring output AC voltage from 10 to 55kV. Two variants are avaliable; depending on the input voltage being used; 110V or 230V AC. Both PST-100 models can be purchased on their own, as a standard kit or as a complete kit. • PST-100 spark tester unit • 150mm long flexible probe electrode • PST-100 spark tester unit • Executive-style case • Operating instructions...

Specifications Model Input voltage Output voltage range Output frequency 100kHz ring pulsed at 50Hz @ 50Hz mains 100kHz ring pulsed at 50Hz @ 50Hz mains 100kHz ring pulsed at 50Hz @ 50Hz mains Accessories We manufacture a wide range of accessories and electrodes; a small selection is shown below. For a comprehensive list, please visit www.buckleysinternational.com or contact our sales team. Drum Brush Electrode 6005-0237 45° - 100mm Phosphor Bronze Electrode 45° Gauze Mesh Electrode 128mm 6005-0376 Nose Cones Metric - Imperial Adaptor (black) Knurled ThumbNut & Back-Nut Pointed Probe Electrode...