High-flow centrifugal pump Mix water and milk of lime with each other, constructed of AISI 316 steel. Laser welded according to EN733 (DIN24255). Pump located in the technical compartment. Automatically operated diaphragm valves Valves that regulate the flow of lime milk solution to the nozzles. Pneumatically controlled through the carrier vehicle system. Paintwork The painting process of the carpentry parts is done in several stages: SA 2.5 shot blasting; powder primer with 30% galvanized epoxy resin; polyester powder coating, baking at 200°. Hydraulic and electrical parts, on the other hand, are treated with Teroson Terotex 3000. This type of painting has obtained certification from an independent laboratory for resistance to over 2000h in salt spray. Auxiliary engine data Power in work of auxiliary engine 14,8 kW IBC container compartment and lime cube Compartment prepared for the storage of the 1000-liter lime cube. The structure facilitates easy loading and unloading, there is anti-tip protection with a safety bar and a catch basin to prevent dispersion of the material on the vehicle. Auxiliary engine oil tank capacity Lime milk agitator It is placed directly inside the lime cube and must be operated time before the machine is used. It is used to re-emulsify the precipitated solution, the processing time goes by how long the lime milk has been stationary without being stirred. Operated by hydraulic motor. Solution dosage ECOS control panel Microprocessor control panel allows spreading adjustment by different operating parameters. Powered from the driver’s cab of the carrier vehicle, storage of up to four spreading programs. Possibility of downloading data to PC and sending reports to printer. Maximum auxiliary engine power 16,3 kW Maximum torque auxiliary engine 48 Nm Auxiliary engine diesel tank cap. Gear pump for lime milk management This pump is made of AISI 316 steel and bronze, dedicated to the mixing of lime milk. Located in the technical compartment. Modular tanks Modular tanks made of recyclable polyethylene and connected together in such a way as to obtain a solid structure while maintaining enough flexibility to be mounted on the chassis of vehicles without limiting their elasticity. Each tank has a capacity of 2500 l and features a manhole opening with a diameter of 455 mm. Spreading data Spreading diagram STD 1.5 - 3 - 4 - 5 m Spreading diagram OPT 1.75 - 3.5 - 4.25 - 5 m Maximum working speed (solution) 10 km/h Maximum water dosage 2500 g/m2 Technical compartment High-strength steel rear cowling to protect the technical compartment (pump, valves, electrical/electronic components). The technical compartment is opened by gas springs. Maximum working speed (water) 2.5 km/h Fasi di lavoro For local contact and support, please scan the QR code or visit buchermunicipal.com Bucher MixSpray_datasheet_Rev00_07/2023 Technical data is subject to change without prior notice. The illustrations may deviate from standard equipment. Bucher Municipal Preparation of milk of lime Hydrated lime is a substance that tends to precipitate even after a short resting time. It must therefore be agitated by means of a pump that stirs the solution via the control panel located in the cabin. Milk of lime spreading The concentrate is ready for mixing and spreading. The machine mixes, doses and finally spreads the required amount, according to the parameters set on the control panel and without the need for operator intervention. Automatic system flushing At the end of work, the internal flushing of all machine components is automatically activated. Pressurized water is injected into the various pipes, so that maintenance costs are lowered.

Bucher Municipal Bucher MixSpray M Lime milk spraying machine Bucher MixSpray M Bucher MixSpray M auxiliary engine driven technical data Bucher MixSpray M hydraulically driven technical data ML350 Min. loading length (suggested +150 mm) Min. loading length (suggested +150 mm) Total length Total length Lime cube length Lime cube length Maximum height Maximum height Total water capacity Total water capacity Single tank capacity Single tank capacity Lime milk capacity Lime milk capacity Maximum spray width Maximum spray width Solution concentration Solution concentration Maximum auxiliary reel flow...