WING SCREWS
4Pages

» Radiuses as per DIN 316, i.e. ergonomic wings, no sharp edges » Complete range M4x8 - M16x60 available while stocks last » On request: specialist lengths up to 300 mm, with partial thread, with special thread ends or with disc » See also separate product sheet “Specialist wing screws" PACKAGING: MATERIAL: TOLERANCE: Standard or according to customer specification Malleable cast iron head, EN-GJMB-350-10 as per DIN EN 1562, steel shank min. quality 4.6, bright, galvanised, nickel-plated as per DIN EN ISO 4042 On request: stainless steel A2 or A4, surface pickled, passivated Metric thread 6 H (bright 6 g) as per DIN EN ISO 965-1 All of the dimensions stated above are approximate and may deviate both upwards and downwards.

» Radiuses as per DIN 316, i.e. ergonomic wings, no sharp edges » Complete range M4x8 - M12x60 available while stocks last » One-piece cast model PACKAGING: Standard or according to customer specification All of the dimensions stated above are approximate and may deviate both upwards and downwards.

» From M3x6 - M12x60 available while stocks last » On request: special lengths and individual thread ends » With flange beneath wing head, also available without flange on request PACKAGING: Standard or according to customer specification All of the dimensions stated above are approximate and may deviate both upwards and downwards.

SPECIALIST WING SCREWS PRODUCT EXAMPLES ON THE BASIS OF DIN 316 Special lengths up to 300 mm, with partial or full thread With set screw 8.8, 10.9 and 12.9 Screws with fixed or captive washer, Partial thread, with or without eye Thread end with tip, pin, rivet pin or similar as per EN ISO 4753 Thread recess PRODUCT EXAMPLES WITH SPECIALIST WING FORMS Wing screws with extra-large wings Wing screws with hex and adapter PRODUCT EXAMPLES IN BRASS Waler wing screws M10 x 25 Bright or nickel-plated » According to BTS company standard » As complete specialist part as per drawing / sample » On...