Mounting eyes BO 716 BO 718 Height x width approx. mm 40 x 18 45 x 24 Single hooks Double hooks MATERIAL: SURFACE FINISH: TOLERANCE: Malleable cast iron EN-GJMB-350-10 as per DIN EN 1562 Steel bright, galvanised, nickel-plated as per DIN EN ISO 4042, further finishes on request Metric thread 6 H [bright 6 G] as per DIN EN ISO 965-1 Minimum volumes are required, depending on article or surface finish. All of the dimensions stated above are approximate and may deviate both upwards and downwards. BTS Befestigungselemente-Technik GmbH T: +49 6581 9168-88 PostFach 1262 E: [email protected]

Semi-circular washer Malleable cast iron EN-6JMB-350-10 23 x 26 x 7 mm With hole 12 mm Star grip nut Malleable cast iron EN-6JMB-350-10 With thread M10 Flag holders/ jointing sleeves Malleable cast iron EN-6JMB-350-10 with or without lug Holder for window shutter Grey cast iron » According to BTS company standard » As complete specialist part as per drawing or sample » On request: complete planning and design of new parts SURFACE FINISH: For malleable cast iron parts bright, galvanised, nickel-plated as per DIN EN ISO 4042, All of the dimensions stated above are approximate and may deviate both...

KEYS Mandril key, three-edged and square Dimensions: Dimensions: Square socket key, length approx. 110 mm, conus approx. 7-9mm 50 Pcs Water tap key, square socket 5.3 x 5.3 mm for size 5 100 Pcs Angle key with hole, conus approx. 6-9mm, square socket: 8mm 50 Pcs Angle key without hole, conus approx. 6-9mm, square socket: 8mm 50 Pcs Malleable cast iron EN-GJMB-350-10 as per DIN EN 1562 SURFACE FINISH: Steel bright, galvanised, nickel-plated as per DIN EN ISO 4042, further finishes on request Minimum volumes are required, depending on article or surface finish. All of the dimensions stated above...

» Ideal dimensions for use in connection with strut rail system PACKAGING: 100 pcs/box MATERIAL: Steel, minimum hardness 130 HB galvanised as per DIN EN ISO 4042, stainless steel A4, further dimensions and finishes on request. MATERIAL: Steel, min. hardness 130 HB, galvanised as per DIN EN ISO 4042, further finishes on request Application: 1. Rotate sliding block on threaded rod. 2. Guide sliding block through the opening in the profile. 3. Rotate threaded rod with sliding block 90°, then pull downwards before rotating upwards until locking. The conical form then lies flat with the angle of the...