Safe working loads For hammer-head bolts The maximum safe working load of the channel used is to be observed. BTS provides no guarantee For the saFe working load of the channel. The Following safe working loads apply for BTS hammer head bolts in steel and stainless steel For strut channels exposed to static load. » Pre-mounted with washer and hex nut DIN 934 » On request: Hot-dip galvanised top screws, individual toothing and tooth distance, special thicknesses, special lengths » Complete special part, also For other profile sizes MATERIAL: Steel, minimum hardness 130 HB zinc-plated acc. to DIN EN ISO 4042, stainless steel A4, Further Finishes on request All of the dimensions stated above are approximate and may deviate both upwards and downwards. QUALITY THAT FASTENED BTS BeFestigungselemente-Technik GmbH PostFach 1262 D-54439 Saarburg

Product benefits: 1. Time savings by pre-assembled system in various lengths 2. Sticks in the channel, ideal for vertical installations 3. Easy to move within the rail 4. No jamming of the spring in perforated channels 5. Just one system for all strut channels Mounting: 1. Guide topscrew through the opening in the profile 2. Press against topscrew whilst simultaneously rotating by 90 Safe working loads The following safe working load apply for BTS topscrews in steel and stainless steel for strut channels exposed to static load. The maximum safe working load of the channel used is to be observed....

» Completely mounted with DIN 9021 washer and DIN 934 hex nut » On request: Special parts, also for other profile sizesMATERIAL: Steel, zinc-plated acc. to DIN EN ISO 4042, further finishes on request All of the dimensions stated above are approximate and may deviate both upwards and downwards. BTS Befestigungselemente-Technik GmbH PostFach 1262 D-54439 Saarburg QUALITY THAT FASTENED

HAMMER-HEAD BOLTS ONE-PIECE MODEL FOR PROFILES WITH STRAIGHT FLANGES Type 20/12 28/15 38/17 41/22 » As standard for profiles: 20/12 and 28/15 with and without square, 38/17 with square, 41/22 without square » On request as complete special part, according to customer drawing or sample, also for other profile sizes HAMMER-HEAD BOLTS ONE-PIECE MODEL FOR C-PROFILES Type 40/22 50/30 72/48 » As standard for profiles: 40/22, 50/30, 72/48 » As complete special part, according to customer drawing or sample, also for other profile sizes Steel 4.6 or 8.8 zinc-plated acc. to DIN EN ISO 4042 or hot-dip galvanised,...