PRODUCT CATALOG www.bts - saarburg.de/en

BEAM CLAMPS WING SCREWS THUMB SCREWS HAMMER HEAD BOLTS CHANNEL NUTS SPECIAL ITEMS

08 - 15 BEAM CLAMPS AND ACCESSORIES QUICK FIXING CHANNEL NUTS + 52 HOOK BOLTS AND EYEBOLTS + 53 WASHERS AND WEDGE NUTS + 54 SEMICIRCULAR WASHERS, STAR GRIP NUTS, FLAG HOLDERS, HOLDERS FOR WINDOW SHUTTERS BTS BEFESTIGUNGSELEMENTE- TECHNIK GMBH A NAME THAT STANDS FOR QUALITY AND RELIABILITY.

THE COMPANY As a German manufacturer of fastening and fixing elements, BTS Befestigungselemente-Technik satisfies the highest requirements of German quality. This applies to both DIN and standard parts, as well as customerspecific products created from drawings or prototypes. The complete planning and design of new parts is also possible on request. Our strengths are processing, including drilling, thread cutting, welding and assembly as well as customer-specific packaging. We mainly work with cast parts. The blanks from our sister company VS GmbH & Co. KG are the foundation of the high quality...

BEAM CLAMPS PRODUCT BENEFITS Product benefits of approved beam clamps: » » » » Enable use in certified fixed sprinkler systems Load values assured by independent approval bodies Set screw with cup point end to prevent sideways slipping off the I-Beam In case of beam clamps with plain hole a simple height adjustment can also be undertaken after assembling » Pre-assembly with threaded rod and lock nut possible Further product benefits of BTS beam clamps: » Malleable cast iron body, made in Germany » Prior to processing, inspection of all cast parts for visible bubbles » Set screws and lock nuts...

For securing to beams without drilling or welding for: sprinkler systems, heating, ventilation and air-conditioning systems, acoustics systems, electrical, piping and sanitation fittings, engineering and steel structures. The raised marking serves as anti-twist protection when tightening the set screw and is protected by internationally registered design DM/0081575! * Please note the different packaging unit and the different material. » As far as possible, VdS, FM and UL approved » Full range for M6 - M16 threaded rods from stock » Inch thread on request » Distances between jaws from 18 - 45...

BEAM CLAMPS WITH ZINC FLAKE COATING Fig. shows models TKN8, TKN10 and TK12 with Geomet 500B coating. Zinc flake coatings are used in all areas of application for corrosion protection of fastening elements and all kinds of metal parts. DETAILS OF THIS SURFACE » High mechanical and chemical resistance with low coat thickness thanks to a combination of the barrier effect of flake structure, controlled cathodic protection of zinc and passivation of zinc and aluminium » Meets specifications of automative industry worldwide: Salt spray test in accordance with DIN EN ISO 9227 NSS/ASTM B117 » No hydrogen...

BEAM CLAMPSSTAINLESS STEEL For securing to beams in the Following areas: sprinkler systems, heating, ventilation and air-conditioning systems, acoustics systems, electrical, piping and sanitation Fittings, engineering and steel structures. Safe working loads [N] » Easier Installation and improved handling » Higher safe working loads » Due to a longer lead of the thread rod, no premature bending » With DIN 933 M10x40 set screw with cup point (CP] and DIN 439 hex nut » Marking “9mm", “11mm" or ‘"13mm" and material MATERIAL: Stainless steel A4 (1.4401), A2 (1.4301) on request SCOPE OF SUPPLY: Mounted...

BEAM CLAMPS Pull direction against the screw Pull direction against the lower jaw Our type TK and TKN beam clamps can be fixed with the pull direction against the set screw or against the lower jaw. Please see our installation instructions for further information. BTS QUALITY THAT FASTENED All of the dimensions stated above are approximate and may deviate both upwards and downwards.

According to VdS regulations the use of safety straps for beam clamps is compulsory for fixing pipes larger DN65. All beam clamps can be secured with a safety strap against sideways slipping from the beam. Responsible authority regulations are to be observed. MATERIAL: Steel SURFACE FINISH: Zinc-plated acc. to DIN EN ISO 4042 All of the dimensions stated above are approximate and may deviate both upwards and downwards. BTS QUALITY THAT FASTENED

Beam clamps with U-bolt » Completely pre-installed mounting kit with plate, hexagon nuts and washers » U-Bolt for centring the strut channel » The strut channel can be adjusted even after installing the beam clamps SCOPE OF DELIVERY: U-Bolt, base plate, 2 hexagon nuts, 2 washers SURFACE: Zinc-plated acc. to DIN EN ISO 4042, hot-dip galvanized Assembly instructions The Following safe working loads "F" apply for BTS beam clamps with U-Bolt and strut channels For static load. Beam clamps have to be used always in pairs (like shown in the picture on the right side). The maximum safe working load...

All of the dimensions stated above are approximate and may deviate both upwards and downwards. BTS QUALITY THAT FASTENED

SIMPLEX TIMBER CONNECTORS 16

» Available in all popular dimensions and acc. to Fire resistance class F30B » All SIMPLEX connectors with M5 cross-thread to mount with a setting tool » Made in Europe SIMPLEX connectors are used to secure position of specifically designed wooden dowels. They are the perfect solution for lengthwise and transverse connections in timber structures, especially in challenging structures and for increased fire safety requirements. » Perfect for use against shear forces, especially combined with BTS plate connectors type C10 and C11 acc. to EN912. Compared to structures with mortise and tenon joints...

» Complete formation of the pins acc. to DIN 1052, only possible due to natural sand production » Final inspection for cracking and missing pins when bundling » Precise formation of the inner bore = savings of time and labour when fastening the connector at the assembly site » With certificate of compliance 3.1 acc. to EN 10204 - if required » Made in Germany » The CE declaration of performance is available for downloading on our website MATERIAL: SURFACE FINISH: Malleable cast iron EN-GJMB-350-10 acc. to DIN EN 1562 Non-plated, zinc-plated acc. to DIN EN ISO 4042, hot-dip galvanised, further...