*mydirectindustry

CHANNEL NUTS

Product catalog summary

Overview: This document provides technical specifications and guidelines for BTS Befestigungselemente-Technik GmbH's channel nuts, designed for use in strut mounting rails. It includes details on materials, dimensions, load values, and special features.

Specifications:

Materials: Channel nuts are made from steel with a minimum hardness of 130 HB, galvanised as per DIN EN ISO 4042. Options include hot-dip galvanised, stainless steel A4, and other finishes upon request.
Dimensions: Channel nuts are available in various sizes (M6, M8, M10, M12, M16) with different spring options (without spring, short spring, long spring, top nut).
Load Values: Load values for channel nuts in steel and stainless steel are provided for static load conditions, with specific values for each size (e.g., M6: F3 = 5 kN, F4 = 1 kN, T = 3.5 Nm).

Procedures and Recommendations:

Channel nuts are designed for easy and fast mounting with one hand, suitable for vertically-installed rails.
They remain easy to move after mounting and do not jam in perforated rails.
Special requests can be accommodated, such as hot-dip galvanised channel nuts with oversize, individual toothing, and special thicknesses.

Norms and Standards:

Channel nuts comply with DIN EN ISO 4042 for galvanisation and DIN EN 1562 for malleable cast iron.

Additional Features:

Channel nuts with fixing aids are available, providing a secure hold after rotation in the rail.
Customisation options include plastic in RAL colours upon customer request.

Catalog excerpts

TOOTHED FOR STRUT MOUNTING RAILS 19 (Ml 6 -►30) 25 without spring short spring long spring » On request: hot-dip galvanised channel nuts with oversize, individual toothing and tooth distance, special thicknesses » As complete special part, also for other profile sizes MATERIAL: Steel, minimum hardness 130 HB galvanised as per DIN EN ISO 4042, hot-dip galvanised, stainless steel A4, further finishes on request. All of the dimensions stated above are approximate and may deviate both upwards and downwards.

Open the catalog to page 1

Channel nuts without spring MATERIAL: Steel, min. hardness 130 HB, galvanised as per DIN EN ISO 4042, further finishes on request Mounting Channel Nuts DIN 3015 LIGHT SERIES: For the securing of pipe and hose clamps in mounting rails M6, 1/4", M8, 5/16" HEAVY SERIES: For the securing of pipe and hose clamps in mounting rails GMV10 + 12, M10, M12 MATERIAL: Malleable cast iron, EN-GJMB-350-10 as per DIN EN 1562, bright, galvanised, nickel-plated as per DIN EN ISO 4042, on request stainless steel A2, A4, pickled, passivated All of the dimensions stated above are approximate and may deviate both...

Open the catalog to page 2

Channel nut with Fixing aid Load values "Fixing at the Flick of a wrist" Channel nuts The Following load values apply for BTS channel nuts in steel and stainless steel for strut mounting rails in combination with a threaded rod of strength class 4.6 exposed to static load. The maximum load value of the mounting rail used is to be observed. BTS provides no guarantee for the load value of the mounting rail » One type For all strut rails » Simple and Fast mounting with one hand » Holds after rotation in the rail, ideal For vertically-installed rails » Remains easy to move after mounting » No jamming...

Open the catalog to page 3

All BTS Befestigungselemente-Technik GmbH catalogs and technical brochures

Archived catalogs

HAMMER-HEAD BOLTS
4 Pages
BEAM CLAMPS
4 Pages