Oval-loc Clinch Tooling
16Pages

Clinch Tooling Catalog Combining rotation resistance with leak-proof characteristics > INSTALLATION HARDWARE & COMPONENTS Learn more about this Clinching Solution online!

STANDARD CLINCHING SOLUTIONS LEARN MORE ONLINE: ROUND JOINTS Mild Steel Mild Steel Harder Metals Single Joint Rotation Resistance? ROUND JOINTS Tog-L-Loc® and V-Loc™ clinch joints are the most widely used. These round clinch joints have very good strength across a broad spectrum of material combinations, are aesthetically pleasing and at low cost. V-Loc™ performs especially well when joining combinations of aluminum. BTM’s round clinch joints are an economical solution to fastening sheet metal parts. However, round joints, while most popular, have the ability to rotate when used singularly,...

Now you can assemble your sheet metal parts with even less cost using our innovative Oval-Loc® clinch tools which deliver the following advantages: • Parts with limited overlap area and requiring a non-rotating connection can be joined using a single Oval-Loc® punch and die • Oval-Loc® offers tool life similar to Tog-L-Loc, is also leakproof, and keeps coatings intact. • The non-round shape creates nonrotating rigidity and high strength with only one joint. This makes Oval-Loc® ideal for setting the orientation geometry or “GeoClinching” assembled parts. Now parts can be inexpensively...

Punch Holder Assemblies Ball Lock Retention (for quick and repeatable orientation and release) Oval-Loc® Punch Punch Holder Assembly Shank Punch Holder Stripper Tip Die Set Punch Holder Joint Size (3x6 or 4x8) Punch Side Material (T1) Die Side Material (T2) Cap Thickness (CT) Primary Metric Button Dimension (BD) Reference Oval-Loc® Stepped Short Insert (SSI) Die Anvil Depth is the distance from the lowest point of the anvil to the top of the die blades. SAFETY NOTE It is the customer and/or user’s responsibility to provide proper safety controls and/or guarding when a pinch point is...

Tooling Size Oval-Loc Sizing Guide GUIDE SIZING Total Material Thickness (mm) Minimum Single single layer thickness .4mm Minimum Layer Thickness 0.4mm If material is not of not of equal thickness,preferred to have thick material on on Punch Side, not to exceed 3:1. If material is equal thickness, it is it is preferred to have thick material Punch Side, not to exceed 3:1. When Die Side material is thicker, a ratio ratio ofless less than 1:2preferred. When Die Side material is thicker, a of not not than 1:2 is is preferred. Contact BTM for testing and optimization of your application. Upon...

bTm' OvalLoc WWW.BTMCOMP.COM/OVAL-LOC. HTML STANDARD PUNCHES Length BTM COMPANY, LLC. • 300 DAVIS ROAD • MARYSVILLE, MI 48040 • Tel: 810-364-4567 • Fax: 810-364-6178 • www.BTMcomp.com

bJm' Oval'Loc WWW.BTMCOMP.COM/OVAL-LOC. HTML SS20 SHANK PUNCH HOLDER[METRIC] ASSEMBLY INCLUDES: 4) (1) Ball & Retaining Spring Punch Length BTM COMPANY, LLC. • 300 DAVIS ROAD • MARYSVILLE, MI 48040 • Tel: 810-3644567 • Fax: 810-364-6178 • www.BTMcomp.com

(1) Ball & Retaining Spring 2X 6mm Dowels Provided For Location And Orientation M6x1.0 S.H.C.S. For Mounting (3) Places BTM COMPANY, LLC. • 300 DAVIS ROAD • MARYSVILLE, MI 48040 • Tel: 810-364-4567 • Fax: 810-364-6178 • www.BT

bJm' Oval'Loc WWW.BTMCOMP.COM/OVAL-LOC. HTML SS25 DIE SET PUNCH HOLDER ASSEMBLY INCLUDES: 4) (1) Ball & Retaining Spring 2X 6mm Dowels Provided For Location 8 And Orientation M6x1.0 S.H.C.S. For Mounting (3) Places Punch Length BTM COMPANY, LLC. • 300 DAVIS ROAD • MARYSVILLE, MI 48040 • Tel: 810-3644567 • Fax: 810-364-6178 • www.BTMcomp.com

bTm' OvalLoc WWW.BTMCOMP.COM/OVAL-LOC. HTML SS25 SHANK PUNCH HOLDER [METRIC] ASSEMBLY INCLUDES: 1) (1) Punch Holder 2) (1) Stripper Spring 3) (1) Stripper Can 4) (1) Ball & Retaining Spring 5) (1) Oval-Loc® 4x8 Punch 6) (1) Stripper Tip Light Duty Ball Seat BTM COMPANY, LLC. • 300 DAVIS ROAD • MARYSVILLE, MI 48040 • Tel: 810-364-4567 • Fax: 810-364-6178 • www.BTMcomp.com

bJm' Oval'Loc WWW.BTMCOMP.COM/OVAL-LOC. HTML TLO-3X6 STEPPED SHORT INSERT (SSI) DIE Anvil Depth TLO-4X8 STEPPED SHORT INSERT (SSI) DIE Anvil Depth BTM COMPANY, LLC. • 300 DAVIS ROAD • MARYSVILLE, MI 48040 • Tel: 810-3644567 • Fax: 810-364-6178 • www.BTMcomp.com

The Ball Lock Release Tool is used to release a ball from a ball seat. This tool may be used for both the punch holder assembly, and the punch. HOW TO USE A BALL LOCK RELEASE TOOL Simply push the end of the tool onto the ball to release it from the ball seat. USING A BALL LOCK RELEASE TOOL TO UNINSTALL A PUNCH HOLDER USING A BALL LOCK RELEASE TOOL TO UNINSTALL A PUNCH BTM COMPANY, LLC. • 300 DAVIS ROAD • MARYSVILLE, MI 48040 • Tel: 810-364-4567 • Fax: 810-364-6178 • www.BTM

This tool is used to tighten/loosen the stripper can to/from the punch holder. This tool is used to control stripper tip orientation at set-up and tool change. HOW TO USE THE SPANNER WRENCHES Use the Stripper Can Wrench to tighten/loosen the stripper can, and the Stripper Tip Wrench to adjust alignment. SEE THEM IN ACTION! WWW.BTMCOMP.COM/OVAL-LOC-SERVICE.HTML BTM COMPANY, LLC. • 300 DAVIS ROAD • MARYSVILLE, MI 48040 • Tel: 810-364-4567 • Fax: 810-364-6178 • www.BTMcomp

CATALOG > 940 SERIES TOOLING BtM' OvalLoc WWW.BTMCOMP.COM/OVAL-LOC. HTML DIE MOUNTING INFORMATION “940” Series Die Retention The location tolerance to the centerline of the die hole should be ±0.013mm. Because the 940 die has a built in blade shield, the top of the die should not be flush with the detail it’s mounted in. If anvil strength is not an issue, the typical design method would expose the ring of small holes in the guard can. Stepped Short Insert (SSI) Die Mounting For all Oval-Loc® joint sizes 02.25 +o0o0o5 POSITION OF PIN MUST BE CONTROLLED TO MAINTAIN RADIAL ORIENTATION BETWEEN...