Lance-N-Loc® Clinch Tooling
14Pages

Standard Punches, Dies, Strippers, & Holders Lance-N-Loc is a sheet metal clinching system which creates a strong mechanical joint without external fasteners or welding. The metals are lanced and squeezed to form an interlock below the bottom layer of the sheet metal. Lance-N-Loc is good for joining harder materials, multiple layers, and is ideal for use where electrical conductivity is required.

Fastening without Fasteners Lance-N-Loc™ is a sheet metal clinching system which creates a strong mechanical joint without the use of external fasteners or welding. The metals are lanced and squeezed to form an interlock below the bottom layer of the sheet metal. Lance-N-Loc™ is good for joining harder materials, multiple layers, and is ideal for use where electrical conductivity is required. The final result is a joint with a greater width than the drawn section of the metals. This accounts for the high strength of Lance-NLoc™ joints. The entire sequence takes place in a single press...

BTM CORPORATION • 300 DAVIS ROAD • MARYSVILLE, MI 48040 • Tel: 810-364-4567

Lance-N-Loc™ Ball Lock Punches BTM CORPORATION • 300 DAVIS ROAD • MARYSVILLE, MI 48040 • Tel: 810-364-4567 • Fax: 810-364-6178 • www.BTMcorp.com

Lance-N-Loc™ Round Punch Holder [Die Set Mounting] One (1) Ball & Retaining Spring Three (3) Mounting Screws Punch Length One (1) Ball Lock Punch Punch Length M6x1.0 S.H.C.S. For Mounting (3) Places

3.0 Lance-N-Loc™ 940 Series Dies “MINI” Stepped Short Insert (SSI) Die AD Ø 2mm ROLL PIN 5.0 [.20] DEEP (2) PLACES Contact BTM for the maximum total material thickness this die can join. Maximum Button Dimension (BD) for this die is 5.3 [.210] “Mini” dies are used when joining minimum flange widths and total material thickness permits joining with the maximum allowable button dimension (BD). Maximum BD for the mini die is stated. STANDARD Stepped Short Insert (SSI) Die AD Ø 2mm ROLL PIN 5.0 [.20] DEEP (2) PLACES BTM CORPORATION • 300 DAVIS ROAD • MARYSVILLE, MI 48040 • Tel: 810-364-4567 •...

3.0 Lance-N-Loc™ Two Blade Elastomer Dies BTM CORPORATION • 300 DAVIS ROAD • MARYSVILLE, MI 48040 • Tel: 810-364-4567 • Fax: 810-364-6178

3.8 Lance-N-Loc™ Two Blade Elastomer Die BTM CORPORATION • 300 DAVIS ROAD • MARYSVILLE, MI 48040 • Tel: 810-364-4567 • Fax: 810-364-6178 •

BTM CORPORATION • 300 DAVIS ROAD • MARYSVILLE, MI 48040 • Tel: 810-364-4567 • Fax: 810-364-6178 • www.BTMcorp.com

Lance-N-Loc™ Two Blade Elastomer Style “A” Die Holders Elastomer Style “A” Die Holder LIGHT DUTY BALL SEAT Mounting Type BTM CORPORATION • 300 DAVIS ROAD • MARYSVILLE, MI 48040 • Tel: 810-364-4567 • Fax: 810-364-6178

Elastomer Style “A” Die Holder LIGHT DUTY BALL SEAT Ø Mounting Type BTM CORPORATION • 300 DAVIS ROAD • MARYSVILLE, MI 48040 • Tel: 810-364-4567 • Fax: 810-364-6178 • www.B

Lance-N-Loc™ Die Mounting Information Elastomer Style “A” Die Pocket Information Tooling Size Elastomer Short Insert Die Pocket Information BTM CORPORATION • 300 DAVIS ROAD • MARYSVILLE, MI 48040 • Tel: 810-364-4567 • Fax: 810-364-6178 •

Elastomer Short Insert Die Pocket Information R0.5 .02 R0.38 .015 DRILL & C'BORE FOR #6-32 x 3/8 LG. S.H.C.S. Two Blade Die Pocket Information 2 bladed dies require a clearance pocket for the blades to open freely. The locational tolerance to the centerline of the die should be ±0.013 [.0005”]. A hardened die block is required; preferably a minimum of 4150HT steel. Two Bladed Combo Block Die Pocket Information For 3.0, & 4.6 Lance-N-Loc™ joints. BTM CORPORATION • 300 DAVIS ROAD • MARYSVILLE, MI 48040 • Tel: 810-364-4567 • Fax: 810-364-6178 • www.BTM

CORPORATION BTM has a wide range of standard products to meet your needs including: PNEUMATIC CLAMPS & GRIPPERS SHEET METAL JOINING Light & Heavy Duty Clamps Clamps range from light duty omni-directional head clamps to heavy duty precision sealed power clamps. Light & Heavy Duty Grippers BTM’s Gripper line ranges from compact light duty models to locking & non-locking heavy duty models. BTM’s Tog-L-Loc® sheet metal joining system is a cold forming process that quickly joins prepainted, galvanized, coated, and dissimilar metals. Lance-N-Loc™ BTM’s Lance-N-Loc™ Joining System produces clean,...