1. Catalogs
  2. BST Caltek Industrial Ltd
  3. LAN Cable / Wire Tester BS35

LAN Cable / Wire Tester BS35

LAN Cable / Wire Tester  BS35

LAN Cable / Wire Tester BS35

Product catalog summary
Product Overview: The BS35 High Precision TDR LAN Cable Tester is designed for efficient onsite testing of data networks and cable assemblies. It tests both shielded and unshielded LAN cables, identifying common wiring faults such as Open Pair, Shorted Pair, Crossed Pair, Split Pair, and Reversed Pair. A digital display and a remote identifier facilitate easy wire mapping.
Key Features:
  • Accuracy of 2 inches (5 cm) up to 2,000 feet (600 meters).
  • Digital display for five common wiring faults.
  • Includes a remote identifier for wire mapping.
  • Large backlit LCD for easy reading.
  • Automatic functions for impedance control, range, zeroing, and sensitivity.
  • Capability to measure the Velocity of Propagation (V.O.P) of cables.
  • 20 internal memory locations for storing traces.
  • Library of 39 standard cables.
  • Tone generator with oscillating frequency between 910 to 1100 Hz.
  • Line voltage detection with safety protection up to 250 V RMS.
Accessories: The tester comes with various adapters, a remote identifier, patch cables, a coupler, and a carrying case. Batteries are required but not included. Optional additional remote identifiers are available.
Standards and Specifications:
  • Complies with EMS BS/EN 612323-1 and IEC 1010-1 standards.
  • Automatic range control with a maximum range of 600 meters at V.O.P of 66.0%.
  • Resolution of 5 cm and accuracy of ±1% of reading plus 10 cm.
  • Adjustable velocity factor from 1.0% to 99.9%.
  • Input protection up to 250 V RMS at the BNC terminal.
  • Line voltage detection threshold at 6.5 V.
  • Dead zone of 5 meters.
Contact Information: BST Caltek Industrial Ltd. provides contact details for inquiries, including email, telephone, and fax numbers.
See more

Catalog excerpts

LAN Cable / Wire Tester  BS35-1

British Standard Tester BS35 verioocT05 High Precision TDR LAN Cable Tester BS35 is specially designed to speed up the onsite testing of data networks and production testing of cable assemblies. The meter quickly tests shielded and unshielded LAN cables and identifies all commonly found Pair, Split Pair, and Reversed Pair. Digital display shows these 5 common wiring faults and the provided 1 Female RJ45 to Female BNC remote identifier will make wire-mapping a breeze. Break Point TDR technology applicable for any Direct measure cable length in cable consisting of at least 2 insul- one end, without unrolling of ated metallic core. Such as BNC, cable reels LAN, Signal and power cable. Measure cable length and open or short location using Line Voltage Detection: with warning display and auto Integrated 39 sets standard cable data and 20 sets user define memory, allows of quick and easy measurement Quickly identify 5 common wiring faults: Open, Short, Cross, Split and Reversed Due to our policy of continual product development we reserve the right to amend the specifications of all mentioned products without notice.

 Open the catalog to page 1
LAN Cable / Wire Tester  BS35-2

Accurate to 2" (5 cm) throughout the entire range up to 2,000 ft (600 m). Digital Display shows 5 common wiring faults: Open Pair, Shorted Pair, Crossed Pair, Split Pair, and Reversed Pair. Includes 1 remote identifier for wire mapping. Extra-large backlit (ICON type 7 segment) LCD. Automatic output impedance control, auto-range, auto-zero and auto-sensitivity allows for closely matching to a wide range of cables under test. Only V.O.P (Velocity of Propagation) settings required. User-friendly menu on screen operation for easy-to-use. Measuring capability of the V.O.P of a sample cable. 20 internal...

 Open the catalog to page 2
LAN Cable / Wire Tester  BS35-3

British Standard Tester BS35 veno/ocios General Specifications Maximum Range Range Selection Impedance Selection Velocity Factor Tone Generator Cable Library Memory Location Input Protection Line Voltage Detection Dead Zone Automatic range control Automatic output impedance control 39 standard cable types 20 for custom cable types BST Caltek Industrial Ltd. www,bstcaltek.com www.caltek.com.hk www.htcaltek. com www, finestcaltek. asia Flat G, 2/F., Block 4, Golden Dragon Industrial Centre, 182-190 Tai Lin Pai Road, Kwai Chung, NT., Hong Kong Due to our policy of continual product development we...

 Open the catalog to page 3

Archived catalogs

  1. BT501

    2  Pages

  2. BT521

    2  Pages

  3. COMBI419

    9  Pages

  4. BT511

    5  Pages

  5. BT701

    3  Pages

  6. BT513

    5  Pages

  7. BT512

    5  Pages

  8. M73

    9  Pages

  9. BT514

    5  Pages

  10. COMBI420

    11  Pages

  11. PSM2/2A

    4  Pages

  12. GSC53N

    10  Pages

  13. BT502

    2  Pages

  14. Scope Meter

    4  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.