*mydirectindustry

Catalogs
BST Caltek Industrial Ltd
BT604-LAN Cable / Wire Tester

BT604-LAN Cable / Wire Tester

Product catalog summary

Overview: The BT604 is a versatile hand-held device designed for testing and qualifying network media and transmission. It is particularly useful for the installation and maintenance of fast Ethernet and corded telephone networks using UTP cables.

Main Features:

Ping Test: Verifies the operation of fast Ethernet networks (10BASE-T, 100BASE-TX). Supports both DHCP for automatic configuration and Static IP for manual configuration.
LAN Cable Test: Identifies physical defects in LAN cables by examining each wire in the cable core. Results are displayed in real-time using LED indicators.
Telephone Function: Tests the suitability of telephone networks. Includes a line search feature to identify cable ends in bundles. Supports Caller ID demodulation and DTMF dialing.

Specifications:

Corded Telephone: Follows Bell 202A standard for Caller ID with FSK modulation. Supports DTMF dialing and has a line impedance of 600 Ohm.
LAN Cable Test: Tests each wire's connectivity in an 8-pin configuration.
Ping Test: Complies with IEEE 802.3/802.3u standards. Supports auto-negotiation and MDI/MDI-X auto-crossover.

General Specifications:

Connectors: RJ-45, RJ-11
Display: 2.3” Mono Graphic LCD with backlight
Dimensions: Master - 84.1mm x 188mm x 34.9mm; Remote - 84.1mm x 60mm x 37.1mm
Weight: Master - 230g; Remote - 60g
Battery: Master - 9V Alkaline; Remote - 9V Carbon-Zinc
Operating Temperature: 10℃ to 40℃
Storage Temperature: -10℃ to 60℃
Relative Humidity: 90%

Accessories: Includes a master module, remote module, and user’s manual. Batteries are not included.

Standards: Caller ID Standard: Bell 202A; Network Standard: IEEE 802.3/802.3u.

Catalog excerpts

BT604 2in1 Intelligent Telephone and LAN Cable Tester with CALLER ID & NETWORK PING TEST [Main Menu] [Line Search Mode] [DHCP Config.] [Ping Test] Due to our policy of continual product development we reserve the right to amend the specifications of all mentioned products without notice. BT604_PF_v01.doc Created on 10/19/2012 12:06:45 PM Prepared by Kit

Open the catalog to page 1

BST British Standard Tester BT604 REVI OAPRI2 BT604 is a hand-held instrument which let you test and qualify the network media and transmission conveniently. The tester can be recommended when the installation and maintenance of fast Ethernet and corded telephone networks with UTP cables are required. iTELEPHONE CABLE TEST !PING TEST 3EPING TEST BT604 comprises triple functions, which are Ping test, LAN cable test and Telephone. This document describes how to apply test functionalities to network environment properly. User can follow below operational procedures J LIME SEARCH HOPE Due to our...

Open the catalog to page 2

Features 1. Ping Test Ping test function verifies the operation of fast Ethernet network(10BASE-T, 100BASE-TX ). User can configure device IP, subnet mask, default gateway and also destination IP. A. Automatic configuration - DHCP(Dynamic Host Configuration Protocol) DHCP supports automatic network configuration. User can follow below procedure to execute ping test using DHCP function. B. Manual configuration - Static IP Static IP requires manual network configuration. User can follow below procedure to execute ping test using static ip method. 2. LAN(Local Area Network) Cable Test LAN cable...

Open the catalog to page 3

BST British Standard Tester BT604 REVI OAPRI2 • Supports integrated Data-communication and Tele-communication test • Supports ping test: ■ Fast Ethernet media access (1OBASE-T, 10OBASE-TX) ■ *Auto configuration for network media (Auto Negotiation: 10/100Mbps, Full/Half duplex) ■ Auto MDI/MDI-X crossover (Direct/Cross dual cable types are ■ Static IP and DHCP configuration interface • Supports physical connection function test: ■ Each wire(8-pin) connection test of LAN cable ■ Cable search test of telephone cable • Supports high-end telephone function test: • Master module • Remote module • User's...

Open the catalog to page 4

BST British Standard Tester BT604 REVI OAPRI2 [Corded telephone] Dialing Method Line Impedance Test Method [Ping test] Network Standard Media Compatibility - Auto-negotiation Supported Auto-crossover Supported Due to our policy of continual product development we reserve the right to amend the specifications of all mentioned products without notice.

Open the catalog to page 5

BST British Standard Tester BT604 REVI OAPRI2 2.3" Mono Graphic LCD(/w Backlight) (width x height x depth) Remote - 84.1mm x 60mm x 37.1mm Operating (Storage) Relative Humidity BST Caltek Industrial Ltd. www,bstcaltek.com www.caltek.com.hk www.htcaltek. com www, finestcaltek. asia Flat G, 2/F., Block 4, Golden Dragon Industrial Centre, 182-190 Tai Lin Pai Road, Kwai Chung, NT., Hong Kong Due to our policy of continual product development we reserve the right to amend the specifications of all mentioned products without notice.

Open the catalog to page 6

All BST Caltek Industrial Ltd catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list