Catalogs >
BST Caltek Industrial Ltd >
BT602-LAN Cable / Wire Tester

BT602-LAN Cable / Wire Tester
5Pages

Catalog excerpts

BT602 Multifunction LAN cable tester with mapping check and length measurement BT602 permits to test quickly and effectively all cables inside LAN networks. The tester checks all eventual wrong connections (misswires and split pairs), it can detect problems of the cable itself (open circuits, short circuits) and shows results in a large graphical mapping display in a clear and simple way. Large LCD Display with Backlight Graphical Mapping Length Measure By using up to 8 codified remote control units (optional accessories) it's also possible to quickly detect the connection between the RJ45 sockets located in the working rooms and the ones located on the transposition panel or on the HUB. Unlike traditional LAN mapping checkers, BT602 equipped with superior function such as LAN cable length measurement (up to 255m /836ft) and Auto backlight function. User can measure cable length to check cable usage during or after installation. This can help to control and save LAN cable inventory. Its auto backlight function and the giant display enable user to work in weak/dim light environment. BT602 is ideal for LAN network installers who need an easy instrument for a preliminary LAN cable test and troubleshooting. Due to our policy of continual product development we reserve the right to amend the specifications of all mentioned products without notice. Created on 10/19/2012 Prepared by KIT

Open the catalog to page 1

British Standard Tester BT602ver2.cvFEB.10 • Graphical mapping display with auto backlight. WIRE MAPPING Shorted cables Split pairs 1 Test executed on twisted pairs cables UTP and FTP with RJ45 connector. 1 Wire mapping control of following wrong conditions: Open cables Short cables Split pairs 1 Initial auto test 1 Quickly selection of cables pairs. OPEN, SHORT, SPLIT, MISWIRE message at 1 Automatic detection of remote control units (from #1 Due to our policy of continual product development we reserve the right to amend the specifications of all mentioned products without notice.

Open the catalog to page 2

Instrument BT602 1 Remote identifier RM600-1 1 Patch cables, RJ45/RJ45 FTP, 20 cm, connectors Carrying bag Instruction manual (English) Battery required: • 1 battery (9V) (Not included in accessories) Optional accessories • • • • • • • • Remote identifiers #2, #3,#4,#5,#6,#7,#8 + 7 patches cables RJ45/RJ45 STP (RM600) Remote identifier #2 + 1 patch RJ45/RJ45 (RM600-2) Remote identifier #3 + 1 patch RJ45/RJ45 (RM600-3) Remote identifier #4 + 1 patch RJ45/RJ45 (RM600-4) Remote identifier #5 + 1 patch RJ45/RJ45 (RM600-5) Remote identifier #6 + 1 patch RJ45/RJ45 (RM600-6) Remote identifier #7 +...

Open the catalog to page 3

British Standard Tester BT602ver2.o/FEB.io CABLE TYPES 1* UTP, FTP: twisted pairs cables 2» Cable category: from CAT5/ CAT6 3* Maximum cables length : 255m (836 ft) WIRE MAPPING DETECTED COND TIONS OPEN PAIR between each other Generic cabling SPLIT PAIRS CABLE LENGTH MEASURMENT Unit: meter and foot Due to our policy of continual product development we reserve the right to amend the specifications of all mentioned products without notice.

Open the catalog to page 4

2. GENERAL SPECIFICATIONS CABLE TESTER MECHANICAL FEATURES Display: 42mm(W)*33mm(L) Monochrome LCD with backlight Dimensions: 130 (L) x 56 (W) x 38 (H) mm Weight: 170 g REMOTE CABLE IDENTIFIER MECHANICAL FEATURES Input connector: RJ45 Dimensions: 75 (L) x 20 (W) x 23 (H) mm Weight: 25 g POWER SUPPLY Battery type: 1 x 9V IEC6F22 or NEDA1604 alkaline battery Battery life: about 200 hours Shutoff Rate Power: 1uA Operate Maximum Power: 20mA Auto power off: after 2 minutes with no key activity ENVIRONMENT Environment working conditions Working temperature: 5 - 40 ° C Relative humidity: <80%...

Open the catalog to page 5