DX Hammer Range DX20, DX25, DX30

Product catalog summary

Overview: The DX range of hydraulic piling hammers is designed for driving small bearing piles made of steel, timber, concrete, and various sheet piles. These hammers can be mounted on a piling mast or an excavator, offering flexibility in operation.

Key Features:

Total control over the hammer allows precise energy matching to suit pile driving requirements.
Double acting cylinder for high impact energy and fast blow rate.
Economical with low hydraulic power requirements.
Compatible with BSP Hydropacks for optimal performance.
Can be operated from a hydraulic crane or excavator base.
Capable of driving piles with an ultimate load bearing capacity of up to 1800kN.

Pile Types: The hammers can drive a variety of piles, including Arcelor AZ and AU14 piles, LX / PU / W Ranges, Hoesch H1200 to H3600, ‘H’ Piles, HP260 to HP400, USA HP10” to HP16”, and tubes up to 406mm in diameter.

Model Specifications:

DX20: Blow rate of 60 bpm, ram mass of 1500 kg, operating pressure of 160 bar, max impact energy of 20 kNm, hydraulic oil flow required is 130 L/min.
DX25: Blow rate of 60 bpm, ram mass of 2000 kg, operating pressure of 160 bar, max impact energy of 25 kNm, hydraulic oil flow required is 150 L/min.
DX30: Blow rate of 60 bpm, ram mass of 2500 kg, operating pressure of 180 bar, max impact energy of 30 kNm, hydraulic oil flow required is 170 L/min.

Technical Data:

DX20: Overall length of 3900 mm, hammer mass of 4350 kg, hammer width of 600 mm.
DX25: Overall length of 4500 mm, hammer mass of 4950 kg, hammer width of 600 mm.
DX30: Overall length of 5500 mm, hammer mass of 5750 kg, hammer width of 600 mm.

Applications: The DX hammers are suitable for various applications, including rail track and sheet piling.

Catalog excerpts

MAKING A GLOBAL IMPACT CLAYDON BUSINESS PARK, GIPPING ROAD, GREAT BLAKENHAM, IPSWICH, SUFFOLK IP6 0NL ENGLAND TELEPHONE: +44 (0) 1473 830431 EMAIL: [email protected] WWW.BSP-IF.CO.UK The DX range of hydraulic piling hammers are designed for small bearing piles of steel, timber, concrete and many sheet piles. The DX hammer is available with back guides for operating from a piling mast or a slider for operating from an excavator. The hammers have the following important features: ■ Total control of hammer ■ Allows precise matching of energy to suit the pile driving requirements ■ Double acting cylinder produces high impact energy and fast blow rate ■ Economical - Low Hydraulic power requirements ■ Available with BSP Hydropacks for optimum hammer performance ■ Hammer can be operated directly from hydraulic crane or excavator base ■ Can drive piles with ultimate load bearing up to 1800kN PILE TYPES TYPICAL PILES DRIVEN SINGLY OR IN PAIRS. Most Arcelor AZ and AU14 piles. Also, LX / PU / W Ranges, Hoesch H1200 to H3600, ‘H' Piles, HP260 to HP400, USA HP10” to HP16”. Tubes up to 406mm Dia (16”) Rail Standard 610mm & 762mm Diameter tubes, plus many others...

Open the catalog to page 1

Overall Length Overall Length Overall Length DX-RT RAIL TRACK APPLICATION DX-SP SHEET PILING APPLICATION * Dimension depending on hammer configuration.

Open the catalog to page 2

DX Hammer Range DX20, DX25, DX30

DX Hammer Range DX20, DX25, DX30

Catalog excerpts

All BSP International Foundations Limited catalogs and technical brochures