MAKING A GLOBAL IMPACT CLAYDON BUSINESS PARK, GIPPING ROAD, GREAT BLAKENHAM, IPSWICH, SUFFOLK IP6 0NL ENGLAND TELEPHONE: +44 (0) 1473 830431 EMAIL: [email protected] WWW.BSP-IF.CO.UK CX110, CRANE SUSPENDED AND FITTED WITH TUBE GUIDE CX85, CRANE SUSPENDED AND FITTED WITH LEGS AND INSERTS FOR DRIVING SHEET PILES PILE TYPES TYPICAL PILES DRIVEN SINGLY OR IN PAIRS (IF GROUND CONDITIONS ALLOW): Arcelor AZ12 to AZ50, AZ36-700 to 40-700 All Arcelor AU sections. Also, LX / PU / W ranges, USA PZ range, Hoesch H series, ‘H' Piles, HP200 to HP400 USA HPI0” to HPI6” Tubes and Concrete bearing piles up to 1220mm OD plus many others... ■ Total control of hammer stroke and blow rate ■ Allows precise matching of energy to suit the pile driving requirements ■ Highly efficient hydraulic system gives low energy loss and low running cost ■ Simple, fast dolley changing ■ Cylinder and dropweight connection with shock absorber, easily accessible ■ Cage and dropweight design gives short overall hammer length ■ Available with BSP Hydropacks for optimum hammer performance ■ Can be operated directly from hydraulic crane or excavator base ■ Suitable for driving Raked (Batter) Piles The above weights and dimensions are given as a typical guide and are nominal. Designs can vary to suit customer specific applications and pile type. Contact BSP IF for greater detail.

Overall Length Overall Length Overall Length All CX hammers are available in the following three standard hammer configurations: Other options available upon request. (Dimensions are mm). (A) Hammer with back guides for use with leaders. Inserts available for tubes up to 762 Dia Pile Guide shown is suitable for tubes up to 1220 Dia. (B) Hammer with legs and inserts for driving sheet or bearing piles freely suspended. (A) HAMMER WITH BACK GUIDES FOR LEADER OPERATION (Designs for larger tubes available on request). (C) Hammer with pile guide for driving tubes vertically or at rakes. Table shows...