MAKING A GLOBAL IMPACT CLAYDON BUSINESS PARK, GIPPING ROAD, GREAT BLAKENHAM, IPSWICH, SUFFOLK IP6 0NL ENGLAND TELEPHONE: +44 (0) 1473 830431 EMAIL: [email protected] WWW.BSP-IF.CO.UK CG240 DRIVING CONCRETE PILES CG300, LEADER MOUNTED ON A BARGE, DRIVING STEEL TUBE PILES CG300 DRIVING 2.5M DIAMETER STEEL TUBES The CG range of piling hammers is designed for driving a variety of bearing piles including steel tube, combi piles, ‘H’ sections and reinforced / pre stressed concrete piles. Operated from piling rig leaders or crane suspended, the CG range has the following important features: ■ Total control of hammer stroke and blow rate ■ Allows precise matching of energy to suit the pile driving requirements ■ Simple fast dolley changing ■ Cylinder and dropweight connection with shock absorber, easily accessible ■ Economical - Low hydraulic power requirement ■ Available with BSP Hydropacks for optimum hammer performance ■ Can drive piles with ultimate load bearing up to 14,500 kN ■ Suitable for driving Raked (Batter) Piles The above weights and dimensions are given as a typical guide and are nominal. Designs can vary to suit customer specific applications and pile type. Contact BSP IF for greater detail. Performance related to use with BSP Hydropacks.

Body width for CG Hammers: 1250 sq Pile guide for use freely suspended, vertically or raked. Versions available to suit: 1.5m max dia tubes or 3.0m max dia tubes. Basic Hammers can be fitted with the following configurations C Helmets for concrete Piles up to 0.9m dia for use in leaders Special Drive Cap for concrete piles up to1.2m dia for use in leaders. Standard Drive Cap, Helmet & Pile Guide options. Other options available upon request. (Dimensions are mm). TYPICAL DIMENSIONS BASIC HAMMER The above weights and dimensions are given as a typical guide and are nominal. Designs can vary to suit...