*mydirectindustry

BH120

Product catalog summary

Overview: The BSP BH120 is a compact, high-performance hydraulic hammer designed for driving small sheet piles, bearing piles, and general post driving. It is versatile and suitable for various construction applications.

Key Features:

Total control of hammer stroke and blow rate for precise energy matching to driving requirements.
Fast blow rate enhances productivity.
Manual, tamp, and auto control modes available.
Quick coupler allows for rapid attachment to an excavator or backhoe.
Transportable on-site or on highways.
Compatible with metal or plastic drive caps and various post shapes (round, square, rectangular, H-section).
Suitable for wood, concrete, and metal materials.
Low hydraulic flow demand results in low fuel consumption.

Technical Specifications:

Hammer weight (without leader): 500 kg
Hydraulic supply requirement: 20-40 L/min at 160 bar
Blow rate: 120-150 bpm, dependent on driving conditions
Maximum potential energy: 1200 Nm (J)
Dropweight mass: 100 kg
Basic hammer width: 795 mm
Basic hammer length: 1760 mm
Leader weight: 250 kg

Leader Features:

Allows up to 1.5m of hammer movement before repositioning is needed.
Can connect directly to bucket linkage or via a quick hitch coupler system.
Supports typical pile/post sizes up to 165 mm diameter and 3.5 m length.
Equipped with 2 quick-release coupling connections.

Applications:

Highway construction and maintenance
House building and subsidence rectification
Railway, defence, agriculture, horticulture, and forestry projects
Local authority projects, sport and leisure facilities
Renewable energy installations, such as solar panel and wind turbine foundations
Bank stabilization, security fencing, and temporary sheet piles for utility services

Contact Information: Claydon Business Park, Gipping Road, Great Blakenham, Ipswich, Suffolk IP6 0NL, England. Telephone: +44 (0) 1473 830431. Email: [email protected]. Website: www.bsp-if.co.uk

Catalog excerpts

MAKING A GLOBAL IMPACT CLAYDON BUSINESS PARK, GIPPING ROAD, GREAT BLAKENHAM, IPSWICH, SUFFOLK IP6 0NL ENGLAND TELEPHONE: +44 (0) 1473 830431 EMAIL: [email protected] WWW.BSP-IF.CO.UK BHI20 DRIVING STEEL PILES BHI20 DRIVING STEEL PILES Total control of hammer stroke and blow rate Allows precise matching of energy to suit the driving requirements Fast blow rate for high productivity Manual, Tamp and auto control modes Quick coupler for bucket to hammer attachment within minutes Suitable for transportation on machine around site or on highways Can be fitted to an Excavator or backhoe as shown Choice of metal or plastic drive caps Round, square, rectangular and H-section posts can all be driven Suitable for post and pile materials of wood, concrete and metal Low hydraulic flow demand - low fuel consumption *** Blow rate dependant on driving conditions.

Open the catalog to page 1

BH TECHNICAL DATA n The BH-120 is shown here mounted on the leader n Leader allows up to1.5m of hammer movement before backhoe re-positioning is required n Leader can be connected directly to bucket linkage or by a quick hitch coupler system n Typical pile / post sizes up to 165dia x 3.5M length n 2 quick-release coupling connections HIGHWAY CONSTRUCTION MAINTENANCE HOUSE BUILDING RAILWAY, DEFENCE Motorway barrier posts, boundary fencing Sign/direction posts, mini piling for house building Mini piling for subsidence rectification Piling for foundation support Sheet piling for retention of banks,...

Open the catalog to page 2

All BSP International Foundations Limited catalogs and technical brochures

Archived catalogs

DX Hammer Range DX20, DX25, DX30
2 Pages