Type D
8Pages

Catalog excerpts

Composite Rupture Disk BS&B Quick-Sert Safety Head Visit our website for the most complete, up-to-date information

Forward Acting Tension Loaded Disks Tension Loaded Solid Metal Rupture Disks Type DTM Series Disk Types Type D rupture disks consist of a slotted metal top section and either a metal or fluorocarbon seal. Pressure is applied to the concave side, subjecting the disk to tension loading. When vacuum is involved in any amount, a vacuum support is required. Adding a ring to the outlet side aids handling and installation, and is a type DRV disk. Ring material is nickel, aluminum, Monel® or 316ss. At low burst pressures a type DR rupture disk is recommnded to aid handling and installation ring...

Open the catalog to page 2

FA-7RTM Quik-Sert Safety Head • Gas and liquid service • Suitable for operating pressure to 80% of the marked burst pressure • Designed for non-fragmentation • Available in sizes 1 through 44 inches (25 through 1,100mm) • Flange insert or union style angular seat holder configuration Manufacturing Design Range Test specimens must rupture within limits below of the pressure specified Desired Pressure Rating psig Specifications Available Sizes FEP fluoropolymer seal: -40°F to 400°F (-40C° to 204°C), TFE fluoropolymer seal: -40°F to 500°F (-40°C to 260°C) Metal seal: -320°F to 1000°F (-196°C...

Open the catalog to page 3

Bolted Type Safety Heads with Conventional Pre-Bulged Rupture Disks Bolted Type Safety Heads for type B and D series rupture disks BS&B Safety Systems bolted type safety heads are normally compatible with ANSI (ASA) pipe flanges and the flanged connections used on most pressure vessels. Safety head inlets and outlets feature angular seating design to accommodate both type B solid metal disks and type D composite disks. BS&B bolted type safety heads are available in standard sizes ranging from 1/2 (12mm) - 44 inches (600mm) ID. Rupture disks are available in pressure ratings from 0.5 to 6000...

Open the catalog to page 4

Composite Disks: Type D, DV, DR, DRR, SDV, DRSV Disk Seal Material Disk Size in Monel® (alloy 400) psig Notes • If Type D, DR or PLD disk will be exposed to vacuum or back pressure, specify DV, DRV, DSV, DRSV or PLDV • TFE fluoropolymer for seals is standard from 1-8 inch sizes. FEP fluoropolymer for seals is standard for 10 inches and larger except when temperature is over 400°F (204°C), or pressure is less than available with TFE • Before specifying any disk, see table of manufacturi

Open the catalog to page 5

Composite Disks: Type D, DV, DR, DRR, SDV, DRSV - Disk Seal Material (continue) PLDV: Center Section Material: 316ss Disk Seal Material Disk Size PLDV: Center Section Material: Nickel Disk Seal Material

Open the catalog to page 6

Composite Disks for Bolted Flange and Union Type Safety Heads Composite disk: PLD; Center Section Material 316ss Disk Size in Disk Seal Material FEP BS&B bolted and union type safety heads require rupture disks with angular seating design. All standard disks with angular seating are listed on the following pages. Listing is by sizes with a full selection of standard disks for each size. Option: For available flat seat D type disks, consult BS&B

Open the catalog to page 7

BSBSystems.com Visit our website for the most complete, up-to-date information Limerick, Ireland T: +353 61 517000 F: +353 61 309689 E: info@bsbflamearrester.ie BSB.ie Visit our website for the most complete, up-to-date information Products, specifications and all data in this literature are subject to change without notice. Questions regarding product selection and specifications for specific applications should be directed to BS&B. All sales are subject to the BS&B standard terms and conditions of sale. Nothing herein should be construed as a warranty of merchantability or fitness for a...

Open the catalog to page 8

Type D 8Pages

Catalog excerpts

All BS&B SAFETY SYSTEMS catalogs and technical brochures

Type D
8Pages