Catalog excerpts
U.S. patents 6,598,454 and 6,843,098 apply; other U.S. and international patents pending. Wireless Monitoring System for Pressure Relief Devices
Open the catalog to page 1SmartDisk® Wireless Monitoring System Cut the wires, cut the $$$! Flexible Wireless Platform Eliminates wiring between sensor transmitter and monitor Battery powered, DC powered with battery backup, optional solar power Ready to use; complete with enclosures Supports discrete switch-type sensors Supports analog type sensors Range to over 10 mi; even greater using repeater Multi-zone capability 32:1 system ratio; expandable to 992 -40°F to 185°F temperature range (-40°C to 85°C) External switched output option at each transmitter Immediate data transmission (DTM) Communication Choice from...
Open the catalog to page 2SmartDisk System Components External Communication with SmartDisk System Data Transmission Module (DTM) The DTM wirelessly transmits the electrical “changes of state” of a pressure event sensor (e.g. Burst Alert® Sensor or pressure switch) immediately. The DTM may power most sensors using its integral replaceable battery (up to five-year DTM Module battery life). Optional external DC with Standard Internal Antenna power with battery back up or optional solar power can be used. A DTM can be installed up to 100 ft (30 m) from its sensor using shielded cable. All receiver modules are provided...
Open the catalog to page 3Building a Wireless Sensor System The freedom of wireless technology gives SmartDisk the flexibility to adapt to local installation conditions. Up to 32 DTM or ATM transmission modules can be programmed to a single receiver. Using RS232/RS485, up to 32 receivers and user devices can be connected together with communication by Modbus protocol. The modular construction of the SmartDisk system makes application of the technology both simple and cost effective. Basic guidelines to follow are: All applications require one transmitter (DTM or ATM) per sensor (unless wired in series with DTM). All...
Open the catalog to page 4All BS&B SAFETY SYSTEMS catalogs and technical brochures
-
GLP-S™ Reverse Buckling Disk
2 Pages
-
LO-TO-FLO™ Safety Head
2 Pages
-
VENT-SAF™ Explosion Panels
4 Pages
-
Buckling Pin Relief Technology
12 Pages
-
Burst Disk Monitors™ (BDM)
4 Pages
-
Burst Alert® Sensor
4 Pages
-
VIS-U-TEC™ Sensor
2 Pages
-
Type D
8 Pages
-
Tank Car Rupture Disks
2 Pages
-
Rupture Disk
12 Pages
-
Introduction to Rupture Disk
14 Pages
-
Corporate Profile
20 Pages
-
The VAC-SAF? System
12 Pages
-
SAF-T-GRAF? Graphite Disks
4 Pages
-
SURE-SAF? System
4 Pages
-
ECO-SAF? System
8 Pages
-
GCR-S? Reverse Buckling Disk
2 Pages
-
BIO-SAF? System
16 Pages
-
GCR-N? Reverse Buckling Disk
1 Pages
-
GLP-S? Reverse Buckling Disk
2 Pages
-
SmartSystem
4 Pages
-
MRB series
1 Pages
-
SIGMA, SIGMA EXL
4 Pages
-
VENT-SAF? Explosion Vents
8 Pages
-
EXPLOSION VENTING
4 Pages
-
AVB
2 Pages
-
Nu-Saf Plus
8 Pages
-
Type B
8 Pages
-
Conversion Factors
2 Pages
-
SR-TC Rupture Disk
2 Pages
-
Composite Bursting Disc Type D
12 Pages
-
SKR-U Reverse Buckling Disk
4 Pages
-
The STA-SAF System
12 Pages
-
Mono Block Graphite Disks
8 Pages