Catalog excerpts
Atmospheric Vacuum RUPTURE DISK A two way relief Rupture Disk designed to protect vessels, silos, storage tanks etc against both positive overpressure and implosions under vacuum conditions. 1. The AVB Rupture Disk is an assembly comprised of four component parts. (Figure 1) 2. Positive pressure relief is controlled by the top section (Figure 1, part 4). Available in standard materials: 316 SS, Inconel, Monel, Nickel and 3. When positive overpressure relief occurs, the complete disk assembly must be replaced. 4. When only vacuum relief occurs, replacement vacuum components (Figure 1, Parts 1, 2 & 3) are available to be used with the undamaged top 1. A dual acting, flat rupture disk which bursts in one direction to relieve positive overpressure and in the other direction as a vacuum breaker. 3. Pressure ratings include 3 psig and up on the positive side and 1 psig and up on the vacuum 4. To achieve maximum disk service life operating pressures may be up to 70% of the tagged burst pressure in the positive direction and up to 60% in 5. The AVB disk is installed in a VB-7R QUIKSERT Safety Head which fits between the bolts of two companion flanges. 6. Asymmetric alignment pins in the Safety Head mate with locator holes in the rupture disk for proper alignment and installation. Head Outlet (?) Slit Slot Cover Head Inlet
Open the catalog to page 1SELECTION DATA VAC-SAF Tablel: Positive Pressure Relief Min/Max Burst Pressures Carbon Steel Others available on request NOTE: Products, specifications, and all data in this literature are subject to change without notice. Questions regarding product selection and specifications for specific applications should be directed to BS&B, Attn: Customer Service Dept. BS&B SAFETY SYSTEMS, INC., 7455 E. 46TH STREET TULSA, OK 74147 PHONE: 918-622-5950 FAX: 91B-66S-3904 1-600-272-3475 BS&B SAFETY SYSTEMS, LTD.. RAHEEN BUSINESS PARK. RAHEEN. LIMERICK, IRELAND PHONE: 353-61-22702 FAX: 353-61-227987...
Open the catalog to page 2All BS&B SAFETY SYSTEMS catalogs and technical brochures
-
GLP-S™ Reverse Buckling Disk
2 Pages
-
LO-TO-FLO™ Safety Head
2 Pages
-
VENT-SAF™ Explosion Panels
4 Pages
-
Buckling Pin Relief Technology
12 Pages
-
Burst Disk Monitors™ (BDM)
4 Pages
-
Burst Alert® Sensor
4 Pages
-
VIS-U-TEC™ Sensor
2 Pages
-
Type D
8 Pages
-
Tank Car Rupture Disks
2 Pages
-
Rupture Disk
12 Pages
-
Introduction to Rupture Disk
14 Pages
-
Corporate Profile
20 Pages
-
The VAC-SAF? System
12 Pages
-
SAF-T-GRAF? Graphite Disks
4 Pages
-
SURE-SAF? System
4 Pages
-
ECO-SAF? System
8 Pages
-
GCR-S? Reverse Buckling Disk
2 Pages
-
BIO-SAF? System
16 Pages
-
GCR-N? Reverse Buckling Disk
1 Pages
-
GLP-S? Reverse Buckling Disk
2 Pages
-
SmartSystem
4 Pages
-
MRB series
1 Pages
-
SIGMA, SIGMA EXL
4 Pages
-
VENT-SAF? Explosion Vents
8 Pages
-
EXPLOSION VENTING
4 Pages
-
Nu-Saf Plus
8 Pages
-
Type B
8 Pages
-
Conversion Factors
2 Pages
-
SR-TC Rupture Disk
2 Pages
-
Composite Bursting Disc Type D
12 Pages
-
SKR-U Reverse Buckling Disk
4 Pages
-
The STA-SAF System
12 Pages
-
Mono Block Graphite Disks
8 Pages