DAX 2-Pole Turbogenerators Equipment supplied to over 130 countries. Over 120 years of electrical experience.

Corby Power Station, UK, incorporating three BRUSH DAX turbogenerators. Introduction Gas turbine driven DAX generator at Kipevu Power Station, Kenya. 50MW BRUSH DAX turbogenerator in Columbia. BRUSH DAX cylindrical rotor, air cooled generators are extensively used in public utility, cogeneration, CHP, industrial and offshore applications. These generators are designed to be driven by both steam turbines and gas turbines, with extensive operational experience of both applications. BRUSH has more experience of the use of gas turbines than any other generator manufacturer in the world and has also...

The rotor of a BRUSH DAX turbogenerator is manufactured from a one-piece forging of nickel chromium molybdenum alloy steel which is de-gassed and vacuum poured to obtain a uniform material which has excellent tensile properties. BRUSH DAX turbogenerators are cooled by air, either in open circuit or closed air circuit configuration. The generator internal system is similar in all cases. Axial slots, to carry the windings and for ventilation, are milled on the periphery of the body of the rotor. The rotor winding conductor material is high conductivity copper/silver alloy strip. The pre-formed...

The BRUSH DAX range of turbogenerators has the following features: • Simple foundation design for economic and speedy civil work. • Minimum number of individual power station components, offering substantial savings on expensive site time. • All units are fully factory tested, reducing commissioning to proving interconnections and combined turbine/generator testing. • Modular construction giving a fine balance between flexibility and standardisation of components for fast economic construction. • Fully developed system readily adapted to any turbine design. • Fully compliant with the provisions...