MATRIX II-MG Series: FTIR gas analyzers
8Pages

MATRIX II-MG Series Configurable High Performance for Gas Analysis. Innovation with Integrity

Gas Analysis. Real-Time. Quantitative. Calibration-Free. The MATRIX II-MG Series comprises four high-performance FT-IR gas analyzers in a compact and rugged housing. They are designed for the automated, high precision and real-time monitoring of gas concentrations in many different applications. This includes for example: ANALYSIS OF INDUSTRIAL GASES AND PROCESS CONTROL The gas analyzers are suited for industrial applications due to the easyto-use software OPUS GA and operational simplicity. Continuous data acquisition is enabled through detector types that do not require liquid nitrogen....

MATRIX II-MG Series Optimized Gas Cell for Your Gas. Gas cells with different optical path lengths, ranging from 10 cm to 26 m, are available to accurately determine mixing ratios across a wide concentration range, from percentage levels down to parts per billion (ppb). The selection of the optimal optical path length involves a careful balance between minimizing noise levels and optimizing the transmission of infrared light. This approach ensures that oversaturated infrared spectra, even when dealing with gas mixtures with IR active compounds in concentrations in the percentage range, are...

Highest Performance Temperature controlled multi-reflection gas cell Temperature and pressure sensors

All gas analyzers of the MATRIX II-MG Series are based on the industry-grade IR Cube with its proven RockSolid™ interferometer. The 5 m multi-reflection gas cell of the MATRIX II-MG5 gas analyzer allows for a high optical throughput, to achieve lowest detection limits. With its nickel-plated interior surface and its gold-coated mirrors, the gas cell features a high robustness, even in presence of corrosive gases. Internal pressure and temperature sensors enable online, in-situ measurements of the gas pressure and temperature for highprecision quantification results. Due to their compact and...

The comprehensive Gas Analysis software OPUS GA allows the continuous and fully automated quantification of gas compounds without the need for calibration measurements or expert knowledge. EASY-TO-USE. OPUS GA establishes an easy-to-use graphical user interface to control MATRIX II-MG and OMEGA 5 gas analyzers. The user can conduct a fast, continuous and fully automated identification and quantification of gas compositions with minimum training effort. Expert knowledge in spectroscopy is not required. OPUS GA user interface: The time series window (top) displays the concentration of...

ACCURATE. The quantification of gas compounds is based on a unique non-linear fitting algorithm which fits a reference spectrum of the target compound to the measured spectrum. The algorithm allows for an accurate detection and quantification of compounds even in the presence of high concentrations of interfering gas compounds, which are also considered in the fitting procedure. The influence of varying gas temperature and pressure is considered by the analysis routine. FLEXIBLE. With the available quantitative gas library, OPUS GA allows for the identification and quantification of more...

Optical path length in gas cell Maximum gas cell temperature ~ 440 x 380 x 250 mm3 (with protective housing) ~ 610 x 450 x 260 mm3 (with protective housing) ~ 610 x 450 x 260 mm3 (with protective housing) MODBUS TCP/RTU, 4-20 mA analog, integrated webserver available Data Output 4800 - 720 cm-1 (other ranges optional) Spectral range Detector Liquid nitrogen cooled MCT, other detectors optional, e.g. TE-MCT, cryocooled MCT or DTGS Rocksolid™, permanently aligned Better than 1 cm-1 (apodized) Option: Better than 0.5 cm-1 Spectral resolution Spectral rate 4 spectra/s at 4 cm-1 spectral...