Catalogs >
Bruker Daltonics >
MATRIX-MG Series

MATRIX-MG Series
7Pages

Catalog excerpts

MATRIX-MG Series Automated High-Performance Gas Analyzers Innovation with Integrity

MATRIX-MG Series Fully Automated Identification and Quantification The target gas is measured in a gas cell for high sensitivity compound analysis based on FT-IR spectroscopy. From the obtained spectra the gas concentrations are retrieved automatically by a nonlinear fitting procedure within the comprehensive software package, without the need for gas calibrations. The influences of interfering gases as well as of varying gas temperatures and pressures are taken into account by the analysis routine. The MATRIX-MG Series comprises three high-performance FT-IR gas analyzers in a compact and...

Open the catalog to page 2

MATRIX-MG5 The industrial grade MATRIX IR Cube with its proven RockSolidTM interferometer is the basic fundament of the reliable MATRIX-MG Series gas analyzers. Electronics The newly designed 5 m multi-reflection gas cell of the MATRIX-MG5 allows for a high optical throughput (high sensitivity) and an optimized gas flow for a fast gas exchange. Its nickel- plated inner surface and gold mirrors allow to measure even corrosive gases. Internal pressure and temperature sensors enable online, in-situ measurements of the gas temperature and pressure for high-precision quantification results....

Open the catalog to page 3

The comprehensive software package OPUS GA (OPUS Gas Analysis) automatically evaluates the measured spectra in real-time in order to identify and quantify the gas compounds. The quantification bases on a nonlinear fitting algorithm that fits the corresponding library spectrum to the measurement. In this fitting procedure also the absorptions of interfering gases are included. More than 400 compounds can be identified and quantified without the need of a calibration measurement. Additionaly, individual reference spectra can be measured by the user. Automatic identification and quantification...

Open the catalog to page 4

Applications Due to the vast range of detectable gas components (> 400 compounds are available without the need to perform calibration measurements), the MATRIX-MG can be used in a very broad field of applications. Among these are for example: Options To meet the specific requirements for a very broad range of applications, we offer several different options for the MATRIX-MG Series: Option for Fast Gas Exchange This option features a gas cell and external tubing to enable a very fast gas exchange to analyze dynamic processes, such as car engine exhaust gas. Industrial applications like...

Open the catalog to page 5

 Optical path length in gas cell  Maximum gas cell temperature ~ 447 x 320 x 240 mm ~ 640 x 450 x 258 mm without protective housing with protective housing ~ 640 x 450 x 258 mm3 with protective housing  Transmission of measurement values to industrial interfaces (such as 4-20 mA analog, PROFIBUS, Modbus) available Performance  Spectral range: 4800 - 750 cm-1 (other ranges optional) Liquid nitrogen cooled MCT, other detectors optional, e.g. DTGS, cryocooled MCT Rocksolid™, permanently aligned Better than 1 cm-1 (apodized), Option: better than 0.5 cm-1  Spectral rate: 4 spectra/s at 4...

Open the catalog to page 6

Bruker Our success stems from our commitment and dedication to provide you the proper analytical tool you require to solve a demanding research problem or run daily quality control routine procedures. Related Bruker Optics Instrumentation EM 27 Remote Sensing FT-IR The EM 27 is a ruggedized remote sensing system providing high performance Spectroscopy in the field. The EM 27 can easily be deployed in the field for various air monitoring applications. Emissions from smoke stacks, waste disposal and hazardous emissions from chemical accidents can be observed with an operating range of...

Open the catalog to page 7