Verification of dimensional accuracy and surface finish measurements in one system InfiniteFocus is a highly accurate, fast and flexible optical 3D measurement system. With only one sensor, users verify dimensional accuracy and measure surface roughness of their components. Based on the technology of Focus-Variation the range of measurable surfaces is almost unlimited. By means of Vertical Focus Probing, which is an extension of Focus-Variation vertical surfaces are probed laterally as well. Components are traceably measured in high accuracy, with a high vertical resolution and in high repeatability. The robust measurement principle of Focus-Variation in combination with a vibration-isolating hardware enables the form and roughness measurement of also large and heavy components. All axes of InfiniteFocus are equipped with highly accurate encoders ensuring precise stage movement. With an automation interface, InfiniteFocus is also applied for fully automatic measurements also in production. Bruker alicona I InfiniteFocus

GENERAL SPECIFICATIONS Measurement principle ositioning volume non-contact, optical, three-dimensional, based on Focus-Variation incl. Vertical Focus Probing technology x OBJECTIVE SPECIFIC FEATURES b ective magni cation Working distance Numerical aperture Extended lateral measurement range ateral measurement range x Measurement point distance Calculated lateral optical limiting resolution inest lateral topographic resolution Measurement noise Vertical resolution Vertical measurement range Vertical scanning speed Measurement speed 1.7 million measurement points/sec. (*) Objectives with longer...