Alicona Standards
1Pages

Form measurement Calibration Tool Circle Diameters CMM Calibration Tool -Checking longer The calibrated sphere distances of the CMM Calibration Tool allow users to measure and verify larger distances according to ISO 10360-8 distances according to ISO 10360-8. Calibration Tool - Verification of vertical and The Alicona Calibration Tool was especially designed for the verification of vertical and lateral accuracy of all lateral accuracy Alicona 3D measuring instruments. Vertical accuracy is checked by means of height measurement (height level 1000pm), lateral accuracy is checked throughout different chessboard. DakkS calibrated (optional). Advanced CMM Calibration Tool Verification Tool Advanced CMM Calibration Tool - Verification of distance and form measurement The Advanced CMM Calibration Tool is particularly designed for the verification of distance and form measurements. Cylinder Diameters Roughness measurement Verification Tool - Verification of form The Verification Tool was especially designed for the accuracy verification of form measurements of Alicona measurement measuring instruments. It has various artifacts such as height steps, angles and cylinder sizes. Traceable Areal Roughness Tool Areal Roughness Standard Edge Calibration Tool Areal Roughness Tool - Verification of optical Areal roughness standard for optical measurements traceable to NPL. With this tool, users verify the accuracy of roughness measurement optical roughness measurements. Edge Calibration Tool -Verification of radius, Standard with 10 different edges traceable to METAS. Due to its cutting tool-like surface, realistic traceability is K-factor and angle possible. In addition to the 8 edges with radii, the standard provides 2 asymmetrical edges with K-factor. Roughness Tool Roughness Tool - Verification of roughness measurement Roughness standard for optical and tactile scanning. Its traceability offers comparisons with other measured values, certified standards or target values. Users measure and check surface geometries and roughness according to ISO 4287/88. DAkkS or NPL calibrated. 56 alicona I Focus-Variation by Alicona Focus-Variation by Alicona I alicona 57