VIBROPORT 80 Vibration Analysis. Rotor Balancing. Machine Monitoring. ng.

VIBROPORT 80 Vibration monitoring and analysis made easy The new VIBROPORT 80 makes it easy for you to obtain a quick, accurate picture of the condition of your machines. Professional machinery diagnostics to optimize uptime m Vibration, within expected limits, is an inherent characteristic of all rotating eris s machines. However, vibration levels exceeding tolerance limits, as in the case n of a machine defect, can result in machine failure and bring production to a total, n unexpected halt. In extreme cases, nearby machines are damaged, toxic compounds released and personnel injured. Since...

VIBROPORT 80 For newcomers and professionals Flexible modules for every need The VIBROPORT 80 is modular in construction. For the newcomer, there are two useful starter packages available: The Analyzer Select package is for vibration diagnostics. It includes rotational speed, FFT spectra, and rolling-element bearing fault diagnosis (envelope analysis). The Balancer Select package provides one or two plane field balancing functionality using polar plots.* A variety of modules are available to the professional user. These include functions for: rotational speed, order analysis, time signals and...

VIBROPORT 80 Early fault detection for preventing machine damage Uncorrected faults on bearings, gears, shafts and couplings can lead to machine degradation and catastrophic failure. Vibration analysis with the VIBROPORT 80 Analyzer Select package enables you to detect developing faults at an early stage, diagnose the cause and trend these, so maintenance can be planned ahead time without risking degradation and machine failure. Characteristic values The overall condition of a machine and its bearings can be evaluated by means of characteristic values that can then be compared with limit values...

VIBROPORT 80 Field balancing of rotors A significant proportion of all machine faults can be attributed to unbalance of rotors. Although rotors are, as a rule, built into the machine precisely balanced after the manufacturing process, unbalance can result because of mounting tolerances and the residual unbalance of components over a period of time. These machines can be effectively balanced onsite. relies on the resonance of the accelerometer as a carrier frequency while the SED analysis depends upon structural resonance. The two newcomer packages, Analyzer Select and Balancer Select support...

SCREEN DISPLAYS Main menu Overalls with predefined measurement tasks VIBROPORT 80 In time with the machine Modal analysis determines the natural frequencies, i.e. resonances of machines. For optimal operation of a machine, it is important to avoid (or minimize the duration) with coincidence between the rotational speed frequency and the structural resonance frequencies. This will minimize excessively high vibrational loads during the run up, coast down or steady-state operation of the machine. These critical frequencies can be determined by two different methods: rotational excitation or impact...

VIBROPORT 80 Documenting success Highlights of the TRANSFER FUNCTION MODULE • Identifying structural resonances using an instrumented impact hammer • Determination of machine component relative movement • All conventional evaluation methods available (load, acceleration, displacement) • Coherence analysis (in percent, with colour coding) • Up to 3 input channels for vibration (triaxial measurements possible) VIBROPORT 80 also offers the Time Signal and Acceptance Test modules. The Time Signal function enables you to visualize the raw signal and store it in a standard (.wav) format. This format...

10/0112 – All information non-binding. Right of alteration reserved. BBR 0033-EN-12 Contact Brüel & Kjær Vibro GmbH Leydheckerstrasse 10 64293 Darmstadt Germany Phone: +49 6151 428 0 Fax: +49 6151 428 1000 Brüel & Kjær Vibro A/S Skodsborgvej 307 B 2850 Nærum Denmark Phone: +45 77 41 25 00 Fax: +45 45 80 29 37 [email protected] www.bkvibro.com

Technical Data* 1. UNITS AND MEASUREMENT TASKS 4. MEASURING INSTRUMENT Units** • Acceleration • Velocity • Displacement • Single or double integration Enclosure • Dimensions: 220 x 220 x 71 mm • Weight: 1.54 kg • Display: 6.4“ TFT VGA, LCD, Backlight (640x480, 18-bit colour) • LED: blue, green, yellow and red • Rechargeable battery: Li-Ion 6600 mAh (operating time 8 hours) **VP-80 can be switched between metric and imperial units Measurement tasks • Overalls (characteristic values) (Total vibration and rolling-element bearing fault frequencies) • Overalls vs. rotational speed f(n) and time f(t)...

Included in the newcomer packages VIBROPORT 80 – “Analyzer Select“ Package consisting of: One VIBROPORT 80 measuring instrument with standard accessories in a carrying case AC-7101 with a license for ReX Standard/client (USB dongle) • Rechargeable battery AC-7003 (built-in) • SDHC-storage card 4 GB (enclosed) • Docking station AC-7307 • Mains power supply AC-7001 • USB connection cable (PC) AC-1390 • Y-cable USB-Power AC-1389 • Shoulder strap AC-7309 • Protective case AC-7305 • Hand straps (2x) AC-7308 • Leather bag for small parts AC-7306 • Protective covers for input sockets AC-7301 • One vibration...