VIBROCONTROI Kemote Diagnostic Mon IIVSI II IvJ

VIBROCONTROL 1500 The powerful and affordable solution for measuring and monitoring three parameters simultaneously at two bearings of a machine: bearing vibration Օ bearing condition temperature In addition to the elements required for vibration measurement, the acceleration sensor AS-062/T1 has a temperature sensor integrated into the same housing to enable simultaneous acquisition of all parameters, while eliminating additional installation and wiring costs. Vibration monitoring Bearing vibration measurements are undertaken in accordance with the ISO standard 10816. The two current readings...

Post-mortem display After a LIM 2 violation, the measured values can be displayed both 994 sec. before and 29 sec. after the violation. Vibration analysis To determine the cause of vibration, VIBROCONTROL 1500 can perform: DFT analyses of the bearing vibration in the range 10 ... 1000 Hz VIBROCONTROL 1500 displays the three largest vibration values with the corresponding frequencies separately for each of the two channels. This makes it easier to identify the cause of the vibration and therefore take the appropriate maintenance action to resolve the problem. VIBROCONTROL 1500 Control-Center-Software...

Scope of delivery and ordering information Type Description 1 VIBROCONTROL 1500 Electronics Monitoring device VIBROCONTROL 1500; for measuring, displaying and monitoring bearing vibration, bearing condition and temperature. Temperature measurement is designed for PT 100 sensors. With trend display, post-mortem display and DFT analysis of the bearing vibration and roller bearing condition. With CAN-Bus interface, relay and analogue output. 2 2.1 AS-062/T1 Vibration sensor Acceleration sensor (CCS type) with integrated temperature sensor PT 100, with 5 m cable, 6-wire lead plus shield and open...