BROYCEC O N T R O L Passionate about protection and control MODBUS OPTION IDMT, IDT, DT TRIPPING CHARACTERISTICS OVERCURRENT DETECTION EARTH FAULT DETECTION VOLTAGE, FREQUENCY POWER, POWER FACTOR, HOURS RUN

OVERCURRENT & EARTH FAULT P9690 Combined Overcurrent/Earth Fault with Voltage Monitoring Key Features: Ÿ True R.M.S. measurements Ÿ Rear pluggable connectors provide quick and convenient method of installation Ÿ Low-set and High-set trip thresholds for both Overcurrent and Earth Fault detection Ÿ 6 selectable IDMT (Inverse Definite Minimum Time) characteristic curves or adjustable DT (Definite Time) in accordance with IEC 60255-151 Ÿ Last trip memory (up to 10 events) Ÿ Three phase Overcurrent and Earth Fault detection Ÿ Measurement and live display of individual phase and earth fault currents...

OVERCURRENT & EARTH FAULT P9620 Definite Time (DT) Earth Fault Relay Key Features: Ÿ True R.M.S. measurements Ÿ Adjustable Low-set tripping threshold Ÿ Adjustable High-set tripping threshold with option to disable Ÿ Adjustable Definite Time setting (applicable to Low-set triggering only) Ÿ Instantaneous tripping on High-set triggering Ÿ Test and Reset buttons for simulating and clearing of fault condition Ÿ Red LED indication of Low-set or High-set triggering and tripping Ÿ Green LED indication for Auxiliary power supply presence Ÿ Microprocessor based (self checking) with non-volatile memory...

OVERCURRENT & EARTH FAULT P9625 Definite Time (DT) Overcurrent Relay Key Features: Ÿ True R.M.S. measurements Ÿ Individual Trip Level adjustment for each phase Ÿ Adjustable Delay setting Ÿ Test and Reset buttons for simulating and clearing of fault condition Ÿ Red LED indication of which phase has been triggered Ÿ Red LED indication of actual tripped condition Ÿ Green LED indication for Auxiliary power supply presence Ÿ Microprocessor based (self checking) with non-volatile memory 2 Ÿ Terminals suitable for 2 x 2.5mm wires (complete with protective cover) Ÿ Supply voltage option: 115V AC or 230V...