BAS-342G
6Pages

Direct Drive Programmable electronic pattern sewer Beautiful pattern stitching, faithful to sewing data (with stitch length 3.5 mm) Strong needle penetration force Economical operation with low power Easy positioning of materials with two-step lowering work The world's highest sewing speed and beautiful stitches with high-speed sewing have been realized. The machine provides high sewing quality and enhanced productivity, while achieving energy savings. Producing beautiful pattern stitches With its accurate stitch point, the machine can perform beautiful stitching for paralleled lines and design topstitches. With the adoption of the high-rigid feed mechanism with servo control, high-precision pattern sewing is available and feed drifting, which is specific to elec- tronic sewing machines, does not occur even in high-speed sewing or weighty material sewing.

Max. sewing speed of 2,700 rpm (with stitch length 3.5 mm) The high-speed sewing at 2,700 rpm with the stitch length of 3.5 mm has been realized. With the adop- tion of Brother's original direct drive motor, starting and stopping of sewing is also quicker. The machine time has been reduced by approximately 28% com- pared with the conventional model and thus the Sewing pattern: Rectangle (250 X 150 mm) Sewing speed: 2,000 rpm (Conventional model*) *With the conventional model (BAS-342F), the highest sewing speed with the stitch length of Strong needle penetration force The driving motor of...

Easy and accurate positioning of materials By setting the work clamp operation to two-step lowering, the work clamp can be lowered to pause at an intermediate position and then lowered to the lowest position. By setting an optimal height for the intermediate position, quick and accurate positioning of materials is possible. This reduces additional clamping operations due to incorrect positioning of the material, shortening the total cycle time. Stable thread tightening available with low-tension sewing Stable thread tightening even with low-tension sewing has been realized, with the...

Easy sewing pattern changing Work clamp can be replaced quickly The work clamp can quickly be replaced by loosening four screws. It can accurately be installed with the positioning pins equipped. Feed plate can be replaced with accurate positioning The feed plate can easily be installed by fitting the feed plate to the base plate and tightening the bolts while matching the reference holes of the both plates. The accurate positioning of the feed plate can easily be made. Large-capacity memory built-in The machine can store large amounts of data (512 patterns, 500,000 stitches) in its...

Cassette feed attachment Cassette support board 342G (SA9090001) It detects a cassette work clamp with the sensor and automati- cally holds it with pneumatic cylinder drive. Automatic ejecting of a cassette work clamp is possible by setting in sewing data. The device can be used to improve the productivity with having two cassette work clamps for the preparation for the next sewing operation while sewing. 2-step thread tension device (SA7197101) Two types of upper thread tension in each sewing program are available by programming with the programmer (PD-3000). The device can deal with the...

1 The stitch length is 3.5 mm or below. (The max. sewing speed depends on the sewing condition.) 2 The numbers of sewing patterns and stitches that can be stored depend on the number of stitches of each sewing pattern. • Product specifications are subject to change for improvement without notice. • Photographs are for illustration purposes. They may not represent actual operating conditions and may display optional parts. • CF™ is a trademark of a SanDisk Corporation. • CompactFlash® is a trademark or US registered trademark of SanDisk Corporation. Please read instruction manual before...