BAS-300G-484/484SF
2Pages

with Cylinder Bed<Treble Hook> 130mm x 60mm Direct Drive Programmable Electronic Pattern Sewer with Cylinder Bed<Treble Hook with Intermittent Presser Foot> ► Less frequency of bobbin change > Upper thread feeding device is equipped as standard ► Accurate thread cutting and thread wiper > Intermittent presser foot(-SF only) ► CF card media for data transfer ► Easy creation of sewing data with PD-3000 (available separately) Working with you for a better environment "roven KE-484C for heavy, extra-heavy materials sewing for seat belt has been powered up its attraction as BAS-300G series.lt brings accurate sewing finishes for extra-heavy materials. Treble hook equipped Treble hook allows three times lower thread to be wound compared to standard hook. This reduces the frequency of bobbin changes, leading to productivity enhancement. Accurate and stout sewing Thread pulling-out is prevented at sewing start The upper thread feeding device supplies the necessary length of upper thread at the start of sewing, preventing the thread from pulling-out regardless of the material feeding amount. Exceptional stitch quality The use of the advanced servo controlled, heavy duty feed mechanism combined with the robust needle bar/thread take-up assembly, create precise stroke/feed timing conditions for optimal stitch formation. This provides excellent, superb stitch quality and tight stitching for a wide range of sewing applications. Accurate thread cutting With adoption of the proven KE-484C thread cutting mechanism and 30% larger pneumatic cylinder, enables threads to be cut more accurately. It allows Extra thick threads to be cut accurately and consistently. Accurate thread wiper The thread wiper is also driven by a pneumatic cylinder. The upper thread can be wiped accurately even under conditions where the thread is difficult to pull out of the material.

Wide range of application with Intermittent Presser Foot(-SF only) Presser foot presses needle area steadily while sewing, preventing skipped stitches, thread breakage and needle breakage. It enables the use for a wide range of applications even loose materials. By setting a suitable height of the presser foot for the thickness of the material, excessive or insufficient pressing by the presser foot can be prevented, enabling a finish with uniform thread tightening. BAS-300G-484SF(with Intermittent Presser Foot) The number of data items and stitches that can be stored will vary depending on...