Support jack load cell Type 0106

Product catalog summary

Overview: The BROSA support jack load cell, type 0106, is designed for precise measurement of supporting forces on stabiliser cylinders, particularly in emergency vehicles and mobile machines. Its robust design ensures reliability even on uneven or inclined surfaces.

Applications: The load cell is suitable for use in mobile cranes, fire trucks, and concrete pumps.

Key Features:

Customizable design to meet specific customer needs.
Resistant to angular force transfer and shear forces.
Integrated amplifier for enhanced performance.
High overload capacity and endurance strength.
Temperature compensated and high EMC resistance.

Technical Specifications:

Accuracy: ≤ 1.0% FS
Measurement Range: 100 kN to 1500 kN
Maximum Load: ≥ 150%, optional 300%
Breaking Load: ≥ 300%, optional 500%
Linearity Error: ≤ 1.0% FS
Hysteresis: ≤ 1.0% FS
Reproducibility: ≤ 0.1% FS
Temperature Range: -40 to +80 °C
Temperature Coefficient: ≤ 0.0035% / K
Supply Voltage: 9 to 36 VDC
Output Signal: 4 to 20 mA, with optional redundant CANopen, safety PROFINET, and PROFIsafe
Protection Class: IP 67, optional IP 69K
Interference Immunity: Up to 200 V/m HF, 100 mA BCI
Emission and Climate Tests: Compliant with DIN EN standards
Vibration Resistance: Compliant with DIN EN 60068-2
Electrical Connections: M12x1, 4-pins
Electrical Protection: Reverse polarity, overvoltage, and short-circuit protection
Material: Stainless steel

Options:

Safety classification according to DIN EN ISO 13849-1 PL c, PL d (PL e)
Explosion protection ATEX Ex i
Passive design with output ~ 1 mV / V

Certifications: ISO 9001:2008, ISO 14001:2004, 94/9/EG

Note: The data provided serves as a product description and is not legally binding. Technical changes may be made.

Catalog excerpts

Support jack load cell, type 0106 For the exact measurement of supporting forces BROSA support jack load cells reliably monitor the forces acting on stabiliser cylinders. Thanks to the special design of the sensors they are extremely unsusceptible against angular force transfers and shear forces. This allows for the precise measurement of the axial force at each individual supporting point, even in case of uneven or inclined surfaces. The support jack load cells ensure the optimum stabilisation of emergency vehicles or mobile machines at all times. Thanks to the robust design with high-quality materials the sensors are ideally suited for permanent operation. Applications • Mobile cranes • Fire trucks • Concrete pumps Features • Customer-specific design • nsusceptible against angular U force transfer • Integrated amplifier • High overload capacity • Designed for endurance strength • Temperature compensated • High EMC resistance

Open the catalog to page 1

Support jack load cell, type 0106 Technical data Accuracy Measurement range Maximum load Breaking load Linearity error Temperature range Temperature coefficient Supply voltage Output signal 4 to 20 mA, optional redundant CANopen, optional safety PROFINET, optional PROFIsafe Protection class Interference immunity Climate tests Vibration resistance Electrical connections Electrical protection classes Reverse polarity protection, overvoltage protection and short- circuit protection Material Stainless steel Options Safety classification acc. to DIN EN ISO 13849-1 Explosion protection Passive design...

Open the catalog to page 2

All BROSA AG catalogs and technical brochures

Archived catalogs

Normal force sensor
2 Pages