Shear force sensor Type 0210

Product catalog summary

Overview: The BROSA shear force sensor, type 0210, is designed for precise force measurement at supporting points using the shear beam principle. Its compact size allows for easy retrofitting in various installations, even where initially not intended. Constructed from high-quality stainless steel, it ensures reliability in continuous use.

Applications: The sensor is suitable for use in production lines, torque support, and elevating work platforms.

Features: Key features include customer-specific design, integrated amplifier, high overload capacity, endurance strength, temperature compensation, and high EMC resistance.

Technical Specifications:

Accuracy: ≤ 0.5% FS
Measurement Range: 3 kN to 50 kN
Maximum Load: ≥ 150%, optional 300%
Breaking Load: ≥ 300%, optional 500%
Linearity Error: ≤ 0.5% FS
Hysteresis: ≤ 0.5% FS
Reproducibility: ≤ 0.1% FS
Temperature Range: -40 to +80 °C
Temperature Coefficient: ≤ 0.0035% / K
Supply Voltage: 9 to 36 VDC
Output Signal: 4 to 20 mA, with optional redundant CANopen, safety PROFINET, and PROFIsafe
Protection Class: IP 67, optional IP 69K
Interference Immunity: Up to 200 V/m HF, 100 mA BCI
Emission: DIN EN 55025
Climate and Vibration Tests: DIN EN 60068-2
Electrical Connections: M12x1, 4-pins
Electrical Protection: Reverse polarity, overvoltage, and short-circuit protection
Material: Stainless steel

Options: Safety classification according to DIN EN ISO 13849-1 PL c, PL d (PL e), explosion protection ATEX Ex i, and passive design output ~ 1 mV / V.

Certifications: ISO 9001:2008, ISO 14001:2004, 94/9/EG.

Note: The data provided serves as a product description and is not legally binding. Technical changes may be made.

Catalog excerpts

Shear force sensor, type 0210 For the precise force measurement at supporting points BROSA shear force sensors are built based on the shear beam principle and can easily be adapted to the local conditions and requirements. Thanks to their small dimensions shear force sensors can easily be retrofitted both in case of a low installation height and in situations in which an installation had originally not been intended. The shear force sensors are extremely reliable when in permanent use thanks to the robust design made of high-quality stainless steel. Applications • Production lines • Torque support • Elevating work platforms Features • Customer-specific design • Integrated amplifier • High overload capacity • Designed for endurance strength • Temperature compensated • High EMC resistance

Open the catalog to page 1

Shear force sensor, type 0210 Technical data Accuracy Measurement range Maximum load Breaking load Linearity error Temperature range Temperature coefficient Supply voltage Output signal 4 to 20 mA, optional redundant CANopen, optional safety PROFINET, optional PROFIsafe Protection class Interference immunity Climate tests Vibration resistance Electrical connections Electrical protection classes Reverse polarity protection, overvoltage protection and short- circuit protection Material Stainless steel Options Safety classification acc. to DIN EN ISO 13849-1 Explosion protection Passive design ©...

Open the catalog to page 2

All BROSA AG catalogs and technical brochures

Archived catalogs

Normal force sensor
2 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list