Force measuring pin MOP , type 0202 For the precise and robust measurements at bearing points BROSA force measuring pins with mechanical stop (mechanical overload protection) are made of highstrength stainless steel and withstand the highest loads. The integrated stop is able to effectively absorb very high overload shocks both in the direction of measurement and against the direction of measurement without the sensor being damaged. Compared to a normal force measuring pin, the ratio between nominal load and maximum load is increased by a factor of 3. These characteristics were developed specifically for the material handling. However, thanks to the integration of the force measuring pins into the force flow, they can be used in a number of other applications as well. The consideration of the exact installation situation from the construction to the calibration of the sensors ensures longterm high measurement accuracies. Applications • Material handling • Dynamically highly stressed measurement points Features • Customer-specific design • Integrated amplifier • High overload capacity • Temperature compensated • High EMC resistance • High mechanical overload protection • Heavy duty design / robust • Installation-space neutral

Force measuring pin MOP type 0202 , Technical data Accuracy Measurement range Maximum load Breaking load Linearity error Temperature range Temperature coefficient Supply voltage Output signal 4 to 20 mA, optionally redundant CANopen, optional safety PROFINET, optional PROFIsafe Protection class Interference immunity Climate tests Vibration resistance Electrical connections Electrical protection classes Reverse polarity protection, overvoltage protection and short- circuit protection Stainless steel Options Safety classification acc. to DIN EN ISO 13849-1 Passive design *Used in parent systems...