Force measuring pin MEMS, type 0201 For the exible measurement of the rope load in sheaves BROSA force measuring pins MEMS are a further development of the tried and tested BROSA force measuring pins that enable the direct measurement of the rope load in crane booms. An integrated MEMS sensor allows the calculation of the suspended load depending on the position of the boom. Thanks to the integration of two measurement systems, the complexity of the design can be further reduced. Any possible parasitic influences are thus reduced to a minimum. Applications • Pulley head • Tip of the boom • Determination of rope load Features • Customer-specific design • Optional integrated angle measurement • Integrated amplifier • High overload capacity • Temperature compensated • High EMC resistance

Force measuring pin MEMS, type 0201 Technical data Accuracy Measurement range Maximum load Breaking load Linearity error Temperature range Temperature coefficient Supply voltage Output signal 4 to 20 mA, CANopen, optional safety Protection class Interference immunity Climate tests Vibration resistance Electrical connections Electrical protection classes Reverse polarity protection, overvoltage protection and short- circuit protection Stainless steel Optionen Safety classification acc. to DIN EN ISO 13849-1 *Used in parent systems according to DIN EN ISO 13849-1 2 1 = Boom angle 2 = Angular offset...