Compression load cell Type 0101

Product catalog summary

Overview: The BROSA compression load cell, type 0101, is designed for precise measurement of axial compressive forces. Constructed from high-strength stainless steel and utilizing FEA-based design, these load cells are capable of withstanding very high loads while maintaining a long lifespan due to their overload capacity of up to 3x the measuring range.

Applications: The load cells are suitable for object weighing, production lines, test rigs, and torque support.

Features: Key features include customer-specific design, integrated amplifier, high overload capacity, endurance strength, temperature compensation, and high EMC resistance.

Technical Specifications:

Accuracy: ≤ 0.5% FS
Measurement Range: 10 kN to 6000 kN
Maximum Load: ≥ 150%, optional 300%
Breaking Load: ≥ 300%, optional 500%
Linearity Error: ≤ 0.5% FS
Hysteresis: ≤ 0.5% FS
Reproducibility: ≤ 0.1% FS
Temperature Range: -40 to +80 °C
Temperature Coefficient: ≤ 0.0035% / K
Supply Voltage: 9 to 36 VDC
Output Signal: 4 to 20 mA, optional redundant CANopen, safety PROFINET, PROFIsafe
Protection Class: IP 67, optional IP 69K
Interference Immunity: Up to 200 V/m HF, 100 mA BCI
Emission: DIN EN 55025
Climate Tests: DIN EN 60068-2
Vibration Resistance: DIN EN 60068-2
Electrical Connections: M12x1, 4-pins
Electrical Protection: Reverse polarity, overvoltage, and short-circuit protection
Material: Stainless steel

Options: Safety classification according to DIN EN ISO 13849-1 PL c, PL d (PL e), explosion protection ATEX Ex i, Ex d, and passive design output ~ 1 mV / V.

Certifications: ISO 9001:2008, ISO 14001:2004, 94/9/EG.

Note: The data provided serves as a product description and is not legally binding. Technical changes may be made.

Catalog excerpts

Compression load cell, type 0101 For the precise measurement of axial compressive forces Thanks to high-strength stainless steel and the FEA based design, the BROSA compression load cells can withstand very high loads. Even at maximum load the life of the compact sensors are extremely high due to the overload capacity of up to 3x the measuring range. Thanks to the proven and tested strain-gauge technology and fully developed amplifiers providing reliable and exact measurement results, BROSA compression load cells can be permanently used under the most extreme environmental conditions. Applications • Object weighing • Production lines • Test rigs • Torque support Features • Customer-specific design • Integrated amplifier • High overload capacity • Designed for endurance strength • Temperature compensated • High EMC resistance

Open the catalog to page 1

Compression load cell, type 0101 Technical data Accuracy Measurement range Maximum load Breaking load Linearity error Temperature range Temperature coefficient Supply voltage Output signal 4 to 20 mA, optional redundant CANopen, optional safety PROFINET, optional PROFIsafe Protection class Interference immunity Climate tests Vibration resistance Electrical connections Electrical protection classes Reverse polarity protection, overvoltage protection and short- circuit protection Material Stainless steel Options Safety classification acc. to DIN EN ISO 13849-1 Explosion protection Passive design...

Open the catalog to page 2

All BROSA AG catalogs and technical brochures

Archived catalogs

Normal force sensor
2 Pages