SLAMf10/20 Series Pressure Controllers
12Pages

DATA SHEET Pressure Mass Flow Controllers SLA5810/20/40 SLAMf10/20 Series Elastomer Sealed, Digital, Upstream, Downstream, and Remote Transducer Pressure Controllers The SLA Series pressure controllers and pressure controlling flowmeters have gained broad acceptance as the standard for accuracy, stability and reliability. These products have a wide pressure measurement and control range and are suitable for a broad range of operating conditions making them well suited for applications in thin film processes, chemical and petrochemical research, laboratory, analytical, fuel cell and life science among others. Highlights of the SLA Series pressure controller product include: industry leading long term stability, accuracy backed by superior metrology systems and methods using primary flow calibration systems directly traceable to international standards, and a broad range of analog and digital I/O options to suit virtually any application. An independent diagnostic/ service port permits users to troubleshoot or change process conditions without removing the pressure controller from service. This product is also available with a NEMA 4X/IP66 approved enclosure, making it perfect for hosedown/washdown applications. Based on the core control technology present in our industry-leading thermal mass flow controllers, Brooks’ SLA Pressure Controllers are able to control the pressure of a gas based on a set point signal by replacing the thermal mass flow sensor with a pressure sensor. It utilizes closed-loop control, which eliminates the droop and hysteresis associated with traditional mechanical spring diaphragm pressure regulators. With the wide range of options and features available, the SLA Pressure Controller Series provides users with a single platform to support a broad range of applications. Closed loop control User accessible service port Wide pressure range capabilities Advanced diagnostics Superior valve technology Eliminates droop & hysteresis associated with traditional mechanical spring diaphragm pressure regulators Simplified installation, start-up, troubleshooting and access to diagnostics provides maximum uptime Ability to control up to 4500 psig, giving it one of the widest pressure ranges on the market today Ensures device is operating within user specified limits for high process yield and maximum uptime Minimum leak-by, maximum turndown, fast response reduces overall gas panel cost and increases throughput Primary standard calibration systems Simple modular design and reducing total cost of ownership Easily retrofit to existing systems Ensures measurement accuracy is traceable to international standards Weatherproof protection optional for “Hosedown” applications such as: Food, Beverage, Pharmaceutical & Biotech Hazardous area approvals Designed to operate in non-incendive (Division 2/Zone 2) environments Easy-to-service elastomer sealed design provides options for factory or field service maximizing uptime View SLA5810/20/40 SLAMf10/20 Product Page BrooksInstrument.com

Product Description Flexible Pressure Control Capabilities Brooks’ Pressure Controllers can be built for both upstream pressure control and downstream pressure control. These designations are determined by the location of the vessel where the pressure is being controlled. Our upstream pressure controllers can also be considered back pressure regulators, and our downstream pressure controllers can also be considered pressure regulators. In addition, a remote transducer configuration can be used to combine the benefits of pressure control and flow measurement. Advanced Diagnostics Pressure...

Product Specifications Flow Ranges and Pressure Ratings: Pressure Controller Model Pressure Controller Model Flow Ranges N2 Eq. Ratings Max. F.S. Min. F.S. 0.003 50* 0.1 10 Minimum Full Scale Pressure Standard 1 psi 1500 psi Maximum Full Scale Pressure Standard 1500 psia/103 bara 4500 psia/310 bara Pressure Equipment Directive (PED) Module H Category Downstream (Pressure Regulator) Sound Engineering Practices (SEP) Upstream (Back Pressure Regulator) Sound Engineering Practices (SEP) Remote Transducer Upstream or Downstream Sound Engineering Practices (SEP) * Please see sizing tool for flow...

Product Specifications Electrical Specifications Communication Protocol Electrical Connection (SLA58xx) Electrical Connection (SLAMf) 1 x 15-pin Male Sub-D 1 x 9-pin Female Sub-D PG11 Cable Gland, 1/2” NPT (F) Conduit, M20 x 1.5 Conduit Analog I/O V, 1-5 V, 0-10 V, 0-20 mA, 4-20 mA 0-5 Power Max./Purge Power Requirements Watts, Max. DeviceNet® *** 1 M12 with threaded coupling nut (B) N/A N/A Valve Orifice > 0.032”: 8.7 Watts Valve Orifice ≤ 0.032”: 5.2 Watts Valve Orifice > 0.032”: 10 Watts Valve Orifice ≤ 0.032”: 7 Watts VOLTAGE SET POINT INPUT SPECIFICATIONS Nominal Range Full Range...

Agency UL (Recogonized) ATEX IECEx Applicable Standard Certification Class I, Div 2, Group A, B, C, D Class I, Zone 2, IIC T4 Class II, Zone 22 Certifications - SLAMfxx

Product Dimensions SLA5810/20, Thru-Flow, RS485 Note : Aux. Input only used for Remote Transducer Pressure Controllers. Note : Aux. Input only used for Remote Transducer Pressure Controllers.

Product Dimensions SLA5810/20, Thru-Flow, DeviceNet Note : Aux. Input only used for Remote Transducer Pressure Controllers. Note : Aux. Input only used for Remote Transducer Pressure Controllers.

Product Dimensions SLA5840, Thru-Flow, DeviceNet Note : Aux. Input only used for Remote Transducer Pressure Controllers. Note : Aux. Input only used for Remote Transducer Pressure Controllers.

Product Dimensions SLAMf10/20, Thru-Flow, Profibus Note : Aux. Input only used for Remote Transducer Pressure Controllers. Access our library of CAD Drawings

Model Code Code Description I. Code Option Option Description Base Model Numbers Smart Link Advantage II. Package / Finish Specifications Standard Elastomer Series Standard Elastomer Series (NEMA 4X/IP66 Housing) Downstream Pressure Controller Upstream Pressure Controller Remote Transducer Pressure Controller (SLA58xx only) V. Digital I/O Communication (SLA58xx Pressure Controllers) None (select applicable analog I/O) DeviceNet I/O (with 5-pin micro connector) (Only on SLA5810/20/40) Profibus (2x sub-D) RS485 (select applicable analog I/O) V. Digital I/O Communication (SLAMfxx Pressure...