*mydirectindustry

Catalogs
Bronmetal
BRASS BARS /

BRASS BARS /

Product catalog summary

Material Designations and Compositions:
The document provides detailed chemical compositions for various copper and brass alloys, including CuZn39Pb3, CuZn40Pb2, CuZn35Pb2, CuZn36Pb3, CuZn42, and CuZn37Mn3Al2PbSi. Each alloy's composition is specified in terms of percentage of elements like Cu, Al, Mn, Fe, Ni, Pb, Sn, Si, and Zn. The density of these materials is also provided.

Tolerances:
Tolerances for round and polygonal sections are specified, with nominal distances between faces and corresponding tolerance classes (Class A and Class B) detailed for various size ranges.

Weights and Measures:
The document includes weight measurements for brass in different shapes (round, square, hexagonal) across a range of diameters, expressed in kg/m.

Main Alloys:
The main alloys discussed include Cu ETP (Electrolytic Tough Pitch Copper), CuTeP (Tellurium Copper), and CuBe2 (Beryllium Copper). Each alloy's chemical composition, including elements like Cu, Bi, O, Pb, Te, P, Be, Ni, Co, and Fe, is provided.

Mechanical Properties:
Mechanical properties for Beryllium Copper (C17300 and C17200) are outlined, including standards, rod diameters, standard tolerances, and mechanical properties such as yield strength, tensile strength, and elongation.

Bronze and Aluminium Alloys:
The document lists compositions for bronze alloys (CuSn5, CuSn6, CuSn8, CuSn8P) and aluminium alloys (EN AW-2011, EN AW-2017A, EN AW-2030, EN AW-5083, EN AW-6063, EN AW-6082, EN AW-7075), specifying the percentage of elements like Si, Fe, Cu, Mn, Mg, Cr, Zn, and others.

Additional Information:
Other available alloys are mentioned, including CuCrZr, CuCoNiBe, CuNi2Si, and Cu-OF. The document also notes that other measures and alloys are available upon request.

Catalog excerpts

MESSING / BRASS HAUPTLEGIERUNGEN / MAIN ALLOYS Materialbezeichnung / Material Designation Symbol / Symbolic Nummer / Numerical Zusammensetzung in % / Chemical Composition in % Element / Element Rest Rest Rest Rest Rest Rest - Größer / Greater than / ROUND SECTION RUNDER QUERSCHNITT Nennabstand zwischen Flächen / Nominal distance between faces GLEICH-MÄßIGER VIELECKQUERSCHNITT / SECCIÓN POLIGONAL REGULAR TOLERANZEN / TOLERANCES Nennabstand zwischen Flächen / Nominal distance between faces Größer / Greater than Maße / Measure *Gewichte basieren auf der Hauptlegierung CuZn39Pb3 / *Weights based on the main alloy CuZn39Pb3 Messing / Brass (kg / m) Quadratisch / Square 8,082

Open the catalog to page 1

KUPFER, ANGEFAST / CHAMFERED COPPER CU ETP / ETP COPPER Materialbezeichnung / Material Designation KUPFERTELLURID / TELLURIUM COPPER Materialbezeichnung / Material Designation Zusammensetzung in % (m/m) / Chemical Composition in % (m/m) Symbol / Symbolic Nummer / Numerical Element / Element Andere / Others Gesamt Ausgenommen Zusammensetzung in % (m/m) / Chemical Composition in % (m/m) Symbol / Symbolic Nummer / Numérica Andere / Others ABMESSUNGEN / DIMENSIONS Abmessung / Dimension (mm) Rund / Round Sechskant / Hexagonal Quadratisch / Square - *Andere Maße auf Anfrage erhältlich. / *Other measures...

Open the catalog to page 2

BERYLLIUM-KUPFER / BERILLYUM COPPER Materialbezeichnung / Material Designation Symbol / Symbolic Zusammensetzung in % (m/m) / Chemical Composition in % (m/m) Nummer / Numérica MECHANISCHE EIGENSCHAFTEN / MECHANICAL PROPIERTIES Zustand* / Temper* 0,2% Dehngrenze / 0.2% Offset Yield Strength Zugfestigkeit / Ultimate Tensile Strength / Heat Treatment Required Ausdehnung / Elongation 2-3 heures / hours 2-3 heures / hours 2-3 heures / hours 2-3 heures / hours 2-3 heures / hours 2-3 heures / hours *Die Eigenschaften können je nach Durchmesser variieren. / *Properties may vary by diameter Kaltumgeformt...

Open the catalog to page 3

BRONZE / BRONZE HAUPTLEGIERUNGEN / MAIN ALLOYS Materialbezeichnung / Material Designation Symbol Nummer / Symbolic / Numerical Zusammensetzung in % (m/m) / Chemical Composition in % (m/m) Element Cu Fe Ni / Element Rest min. / min. CuSn5 CW451K 0,1 0,2 max. / max. Rest min. / min. CuSn6 CW452K 0,1 0,2 max. / max. Rest min. / min. CuSn8 CW453K 0,1 0,2 max. / max. Rest min. / min. CuSn8P CW459K 0,1 0,3 max. / max. *Andere Legierungen auf Anfrage erhältlich / *Other alloys available under request Gesamt andere TOLERANZEN / TOLERANCES Nennabstand zwischen Flächen / Nominal distance between faces...

Open the catalog to page 4

All Bronmetal catalogs and technical brochures

Archived catalogs

aluminio_extruido_caracteristicas_mecanicas
49 Pages