- Company
- Products
- Catalogs
- News & Trends
- Exhibitions
aluminio_extruido
1 / 2 PagesView full catalog
aluminio_extruido
Product catalog summary
Product Overview:
The document provides technical details about extruded aluminium products, including flats, rods, tubes, and profiles. These products are available in various formats suitable for different applications.
The document provides technical details about extruded aluminium products, including flats, rods, tubes, and profiles. These products are available in various formats suitable for different applications.
Tolerances for Calibrated Rods:
The document outlines the tolerances for calibrated aluminium rods based on diameter and material group. The tolerances vary as follows:
The document outlines the tolerances for calibrated aluminium rods based on diameter and material group. The tolerances vary as follows:
- For diameters from 8 to 18 mm, tolerances are ±0.22 mm for material group I and ±0.30 mm for material group II.
- For diameters from 18 to 25 mm, tolerances are ±0.25 mm for material group I and ±0.35 mm for material group II.
- For diameters from 25 to 40 mm, tolerances are ±0.30 mm for material group I and ±0.40 mm for material group II.
- For diameters from 40 to 50 mm, tolerances are ±0.35 mm for material group I and ±0.45 mm for material group II.
- For diameters from 50 to 65 mm, tolerances are ±0.40 mm for material group I and ±0.50 mm for material group II.
- For diameters from 65 to 80 mm, tolerances are ±0.45 mm for material group I and ±0.70 mm for material group II.
- For diameters from 80 to 100 mm, tolerances are ±0.55 mm for material group I and ±0.90 mm for material group II.
- For diameters from 100 to 120 mm, tolerances are ±0.65 mm for material group I and ±1.00 mm for material group II.
- For diameters from 120 to 150 mm, tolerances are ±0.80 mm for material group I and ±1.20 mm for material group II.
- For diameters from 150 to 180 mm, tolerances are ±1.00 mm for material group I and ±1.40 mm for material group II.
- For diameters from 180 to 220 mm, tolerances are ±1.15 mm for material group I and ±1.70 mm for material group II.
- For diameters from 220 to 270 mm, tolerances are ±1.30 mm for material group I and ±2.00 mm for material group II.
- For diameters from 270 to 320 mm, tolerances are ±1.60 mm for material group I and ±2.50 mm for material group II.
See more
Catalog excerpts
Product format: Technical characteristics : Flats, rods, tubes and extruded aluminium profiles
Open the catalog to page 1
Product format: Extruded Technical Characteristics: Flats, rods, tubes and extruded aluminium profiles
Open the catalog to page 2All Bronmetal catalogs and technical brochures
BM ELECTRICO1 Page
aluminio_laminado_aleaciones12 Pages
aluminio_laminado_equivalencias16 Pages
aluminio_extruido_equivalencias16 Pages
Aluminio AI12 Pages
Aluminium cable3 Pages
BRASS BARS2 Pages
CHAPA DE LATÓN3 Pages
BRONM INDUSTRIAL1 Page
bronmetal metales56 Pages
BM ELECTRICO1 Page
Pletina de cobre2 Pages
Nonferrous electrical52 Pages
BRASS SHEETS4 Pages
COPPER TAPE2 Pages
Chapa1 Page
FLEXICOPPER4 Pages
CuNi2SiCr2 Pages
BRASS TUBES1 Page
ELECTRICAL SECTOR56 Pages
SECTOR INDUSTRIAL80 Pages
BRONZE SHEETS1 Page
Copper Tubes4 Pages
COPPER PROFILES54 Pages
COPPER WIRE1 Page
EN 60228 - Bare Copper Cable2 Pages
FLAT COPPER BAR2 Pages
Brass bars / Alloys4 Pages
Archived catalogs
BRASS BARS /4 Pages
Related Searches
- Connector
- Electrical cable
- Electrical power supply connector
- Copper cable
- Copper electrical cable
- Power cable
- Circular connector
- Multi-strand cable
- Multi-wire electrical cable
- Metal profile
- Industrial profile
- Round electrical cable
- Rectangular profile
- Twisted pair cable
- Aluminum
- Twisted pair electrical cable
- Flat connector
- Flexible connector
- Copper
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.