Filters for Gas and Liquid Flow Meters/Controllers
6Pages

{{requestButtons}}

Catalog excerpts

Filters for Gas and Liquid Flow Meters/Controllers - 1

FILTERS for Gas and Liquid Flow Meters / Controllers

Open the catalog to page 1
Filters for Gas and Liquid Flow Meters/Controllers - 2

> Introduction Inherent to its construction, a thermal mass flow meter or controller for gases is sensitive to contamination. To increase the MTBF (Mean Time Between Failure) it is important to make sure that the gas entering the instrument to clean. The IN-LINE Filter Assembly, screwed into the inlet of the instrument, provides this service. It contains a 316L sintered metal filter cartridge that is suitable for general purpose filtration and can be cleaned with a suitable solvent. If the gas contains a large particulate content, we advise the use of a pre-filter. > Selection ♦ Choose a...

Open the catalog to page 2
Filters for Gas and Liquid Flow Meters/Controllers - 3

Pressure drop Air at 1 bar, 20 °C, pressure vs. flow Model number identification Pressure drop - mbar Pressure rating Filter housing Flow - ln/min Particle filter M-410/M-411/M-420/M-421 Filter cartridge 13 Pressure drop - mbar 15 micron sintered metal 20 micron sintered metal micron sintered metal 10 micron sintered metal micron sintered metal micron sintered metal 0,5 micron sintered metal 40 micron sintered metal Adapter type Pressure drop - mbar 1/4” Face seal male FFKM (Kalrez) Flow - ln/min Viton (factory standard) Flow - ln/min RP/RS type Dimensions in mm. Technical specifications...

Open the catalog to page 3
Filters for Gas and Liquid Flow Meters/Controllers - 4

> Introduction Filters play a relevant role to protect sensitive components in a fluid system. Bronkhorst® COMBI-FLOW filters for liquid flow purposes offer great flexibility, thanks to the modular concept, whereby they can be equipped with different fluid connectors and filter cartridges. M1 Series filters have the advantage, that their cartridge can be replaced without removing the base from the pipe. The configuration of the M2 Series filters features a drain outlet, provided with a drain plug, which can be replaced by a regular fitting to accommodate proper connection to a drainage...

Open the catalog to page 4
Filters for Gas and Liquid Flow Meters/Controllers - 5

> Components 1. Filter body 2. Cartridge 3. O-ring AS013 4. Cover 5. O-ring AS120 6. Drain plug > Model number identification M2 Drain connector 1 OD compression type 2 W" OD compression type > Dimensions M2 Filter Fluid connectors Seals A Viton® 514178 USP/FDA B EPDM 559291 USP/FDA Wetted material S Stainless steel 316L Compression type 3/8" tube A 3 mm OD 18.0 mm Face seal male 3/8" tube A 1/8" inlet 13.7 mm Technical specifications and dimensions subject to change without notice.

Open the catalog to page 5
Filters for Gas and Liquid Flow Meters/Controllers - 6

Bronkhorst High-Tech designs and manufactures innovative instruments and subsystems for low-flow measurement and control for use in laboratories, machinery and industry. Driven by a strong sense of sustainability and with many years of experience, we offer an extensive range of (mass) flow meters and controllers for gases and liquids, based on thermal, Coriolis and ultrasonic measuring principles. Our global sales and service network provides local support in more than 40 countries. Discover Bronkhorst®! Bronkhorst High-Tech B.V. Nijverheidsstraat 1a www.bronkhorst.com NL-7261 AK Ruurlo,...

Open the catalog to page 6

All Bronkhorst catalogs and technical brochures

  1. LOW-ΔP-FLOW

    8 Pages

  2. METAL SEALED

    6 Pages

  3. IQ+FLOW

    6 Pages

  4. MASS-VIEW

    8 Pages

  5. EX-FLOW

    4 Pages

  6. BRIGHT

    4 Pages

  7. FLOW-SMS

    6 Pages

  8. E-8000

    8 Pages

  9. EL-FLOW Base

    4 Pages

  10. IN-FLOW

    8 Pages

  11. MAG-VIEW

    3 Pages

  12. MANI-FLOW

    1 Pages

  13. FLOW-ADJUST

    2 Pages

Archived catalogs

  1. SONIC-VIEW

    2 Pages