FILTERS for Gas and Liquid Flow Meters / Controllers

Inherent to its construction, a thermal mass flow meter or controller for gases is sensitive to contamination. To increase the MTBF (Mean Time Between Failure) it is important to make sure that the gas entering the instrument to clean. The IN-LINE Filter Assembly, screwed into the inlet of the instrument, provides this service. It contains a 316L sintered metal filter cartridge that is suitable for general purpose filtration and can be cleaned with a suitable solvent. If the gas contains a large particulate content, we advise the use of a pre-filter. ♦ Choose a low-flow or medium-flow style filter...

> Model number identification 8 1/4" Face seal male V Viton (factory standard) Flow - ln/min RP/RS type A C D G Span 1 Span 2 ISO 1179 type A C D G Span 1 Span 2 Dimensions in mm. Technical specifications and dimensions subject to change without notice. IN-LINE gas flow filters

> Introduction Filters play a relevant role to protect sensitive components in a fluid system. Bronkhorst® COMBI-FLOW filters for liquid flow purposes offer great flexibility, thanks to the modular concept, whereby they can be equipped with different fluid connectors and filter cartridges. M1 Series filters have the advantage, that their cartridge can be replaced without removing the base from the pipe. The configuration of the M2 Series filters features a drain outlet, provided with a drain plug, which can be replaced by a regular fitting to accommodate proper connection to a drainage facility....

> Model number identification M2 Pore size Drain connector > Dimensions M2 Filter Fluid connectors 1/4" OD compression type 1/4" OD compression type 1/2" OD compression type 1/4" face seal female 1/4" face seal male 1/4" face seal male !V OD compression type 3/8" OD compression type 8 mm OD compression type 1/2" face seal male 1/4" O-ring face seal blind nut A Viton® 514178 USP/FDA B EPDM 559291 USP/FDA Compression type Face seal male Technical specifications and dimensions subject to change without notice.

Bronkhorst High-Tech designs and manufactures innovative instruments and subsystems for low-flow measurement and control for use in laboratories, machinery and industry. Driven by a strong sense of sustainability and with many years of experience, we offer an extensive range of (mass) flow meters and controllers for gases and liquids, based on thermal, Coriolis and ultrasonic measuring principles. Our global sales and service network provides local support in more than 40 countries. Discover Bronkhorst®! Bronkhorst High-Tech B.V. Nijverheidsstraat 1a NL-7261 AK Ruurlo, The Netherlands