RTU32s
8Pages

{{requestButtons}}

Catalog excerpts

RTU32s - 1

RTU32S Series - Small Compact Utility RTU Data Sheet ' simplifying systems

Open the catalog to page 1
RTU32s - 2

INTRODUCTION Brodersen Small Compact RTU32S Series with RTU/PLC functionality. The RTU32S series is based on an embedded 32-bit industrial platform providing flexible RTU functionality for smaller remote applications in the utility and infrastructure markets. Physical communication interfaces includes LAN 10/100MBit/s, COM ports and USB ports. The RTU32S offers support for optional internal or external communication devices like data radios, GSM/GPRS/3G, Wi-Fi, dial-modems etc. makes it the perfect future proof solution for new application designs – also perfect for mounting in areas where...

Open the catalog to page 2
RTU32s - 3

VERSIONS / ORDERING CODES Order code example I/O integration versions Basic - without I/O A 16DI/8DO/4AI 28IO 16DI/16DO 16DIO Memory options No removable Flash 128MB SD Flash Special options Standard configuration TECHNICAL DESCRIPTION Software – General RTU32S open Real Time Operating System is Windows CE Embedded 6. It offers access and support to a wide range of standard network protocols like TCP/IP, UDP, HTML, FTP, SNTP, SNMP, SMTP etc. Compared to other conventional Windows OS, the real time based Windows CE Embedded does support the capacity to handle the necessary priorities for...

Open the catalog to page 3
RTU32s - 4

RTU32S Data Sheet All drivers and any even low level data manipulation are handled in the PLC program. STRATON PLC runtime is a very flexible and powerful tool to use in your application development. It includes features such as; Fieldbus and profile editor for simple and fast driver setup. Free variable definition of variable from simple Booleans to advanced Arrays and Structures. Free program language mix, full conversion features and program part prioritizing. Full Simulation and debugging functions. Large library of ready to use functions. Create your own User Defined Function Blocks in...

Open the catalog to page 4
RTU32s - 5

I/O CONFIGURATIONS The RTU32S is designed for supporting a wide range of integrated IO configurations as well as the range of Brodersen external IO Expansion modules via LocalBus RJ45 connector. rd In additional the RTU32S can be used with 3 party distributed I/O via any of the supported drivers – e.g. ModbusTCP. Integrated I/O options The RTU32S is available in standard I/O configurations including 28IO and 16DIO (16DI+16DO). In addition the RTU32S can be expanded to support up to a larger number of I/O. See section Optional I/O Configuration for details. I/O Expansion Mixed I/O...

Open the catalog to page 5
RTU32s - 6

TECHNICAL SPECIFICATIONS HARDWARE - BASICS CPU: Nuvoton 32-bit W90P910 ARM9 200 MHz. Memory: RAM: 64MB SDRAM. NAND Flash: 128MB. SD Card Flash disc – removable. Integrated and battery backed RTC with 1 msec resolution. RTC accuracy: 34 ppm 1 x LAN 10/100Mbps RJ45. 1 x RS232 with full HW handshake and up to 115.200baud - D-sub 9 pin. 1 x RS232 up to 115.200baud – D-sub 9 pin. 1 x RS485 2-wire via 3 pin screw connector. Limited use – only for pointto-point connections at 9600baud. 2 x USB 2.0. I/O LocalBus for support up to 12 I/O Modules – RJ45. LocalBus I/O interface for I/O Expansion;...

Open the catalog to page 6
RTU32s - 7

RTU32S Data Sheet Measuring accuracy: At -10°-55°C; ±0.3% ± 8LSB (typically 0.1% ± 4LSB). Protection: Mounting: Black corrosion protected aluminum housing. Temperature stability: DIN rail (EN50022) or Wall mounting (via optional mounting kit) Common mode input voltage: Max. ±80V DC. Common mode rejection ratio: Series mode rejection: Isolation (input to input): POWER SUPPLY The power supply ratings for the 3 options are; Power supply type Supply voltage - nominal Supply voltage – absolute maximum input range Mains frequency Power consumption (W) – max. Power consumption (W) – typical...

Open the catalog to page 7
RTU32s - 8

CIRCUIT CONFIGURATION (DIGITAL) INTERFACE OVERVIEW Top view Power Supply input LAN1 / Ethernet USB1 & USB2 COM1 RS232 full handshake LocalBus RJ45 for I/O Expansion Output (PNP type only) COM2 2-wire RS485 COM3 RS232 Industrial digital and analogue I/O Bottom view CIRCUIT CONFIGURATION (ANALOGUE) Industrial digital and analogue I/O Analogue Input Removable SD Card behind cover NOTE: This data sheet is subject to change without any prior notice! Document no. 40270 103 RTU32S Data Sheet 2013_02_10.docx

Open the catalog to page 8

All Brodersen Systems catalogs and technical brochures

  1. RTU32 Brochure

    13 Pages

  2. Analog-PSTN

    4 Pages

  3. GC-10

    2 Pages

  4. RTU-COM

    22 Pages

  5. RTU8

    23 Pages

  6. RTU870

    18 Pages