*mydirectindustry

Power Supplies

Product catalog summary

Introduction
This document provides an overview and selection guide for switch mode power supplies and chargers. It highlights the compliance of these power supplies with isolation requirements from main to output and their adherence to stringent environmental levels in generic EMC standards.

Specifications

Output: 12V DC ± 0.5V, max. 1.0A continuously; 24V DC ± 0.5V, max. 0.5A continuously.
Protection: Electronic short circuit and overload protection.
Ripple/Noise: Max. 100mV pp.
Efficiency: 50-75%, typically 70%.
Mounting: Available for 11-pole plug-in or 35 mm DIN rail (EN50022).
Mains Voltage: 110-240V AC/DC (95-265V).
Mains Frequency: 40-60Hz.
Isolation: Primary to secondary EN 60950 class II, 3.75kV AC.
Ambient Temperature: -20 to 55°C.
Protection: IP40 for plug-in, IP20 for DIN rail.
Housing: Noryl SE-1.
Weight: Typically 100g.

Mechanical Dimensions
The document provides detailed mechanical dimensions for the power supplies, ensuring compatibility with various installation requirements.

Product Description
The switch mode power supplies offer regulated 12 or 24V DC output and can connect to any mains voltage within the range of 110-240V AC/DC. They feature short circuit and overload protection, with LED indicators for output voltage status. Versions are available for both DIN rail and 11-pole plug-in mounting.

Ordering Codes
Different versions and ordering codes are provided for the MCS and MXS series, detailing the type, mounting options, mains voltage, and output specifications.

Technical Data for MXS-40

Output: 12V DC ± 0.5V, max. 1.0A continuously; 24V DC ± 5%, max. 0.5A continuously.
Efficiency: 60-80%, typically 75%.
Mounting: 35mm DIN-rail (EN50022).
Protection: IP20.
Electrical Isolation: 3.75kVAC between supply and output (EN60950).
Weight: Approx. 200g.

Recommendations
For loads above 50%, it is recommended to maintain an air space of 3mm on both sides of the power supply to ensure optimal performance.

Catalog excerpts

INTRODUCTION This section includes switch mode power supplies and charger. Consult the selection guide below to quickly find the relevant data sheet with detailed technical information. All the power supplies meet the requirements to isolation from main to output. Furthermore the product meets the hardest enviromental level in the generic EMC-standards. E-mail: [email protected]

Open the catalog to page 1

Power Supplies Power Supply MCS-40/340 DESCRIPTION Switch mode power supply with regulated 12 or 24V DC output. The power supply can be connected to any mains voltage within the range 110-240V AC/DC. The output has short circuit and overload protection and LED indication of output voltage. Versions available for DIN rail or 11-pole plug-in mounting. Type: Power supply. PLUG-IN type to direct replacement of MC-320/340 Mounting: 11-pole plug-in. DIN rail. Mains voltage: 110/240V AC/DC Output: 12V DC/1.0A DC 24V DC/0.5A DC TECHNICAL DATA Output: Ripple/noise: Efficiency: Mounting: Terminals (D only):...

Open the catalog to page 2

Power Supplies Power Supply MXS-40 DESCRIPTION Switch mode power supply with regulated 12 or 24V DC output. The power supply can be connected to any mains voltage within the range 110-240V AC/DC. The output has short circuit and overload protection and LED indication of output voltage. Type: Power supply. MXS-40 TECHNICAL DATA Output: Mains voltage: 110/240V AC/DC Output: 12V DC/1.0A DC 24 V DC/0.5A DC Ripple/noise: Efficiency: Supply voltage: Net frequency: No-load current: 12V DC ± 0.5V, max. 1.0A continuously. 24V DC ± 5%, max. 0.5A continuously. Electronic short circuit and overload protection....

Open the catalog to page 3

Power Supplies

Power Supplies

Catalog excerpts

All Brodersen Controls catalogs and technical brochures

Archived catalogs