Electronic Timer - Series Micoir 175 • Multi-function Timer 10 different functions (Non Signal & Signal based) • Wide voltage range for both, AC & DC • Separate indications for Power and Relay status • Wide time range: 0.1s - lOOh • High Degree of Accuracy Supply Variation Derived Modes Timing Range Reset Time Setting Accuracy Repeat Accuracy Relay Output Contact Rating Electrical Life Mechanical Life Operating Temperature Storage Temperature Weight (unpacked) Utilization Category Harmonic Current Emissions Radiated Susceptibilty Electrical Fast Transients Conducted Susceptibilty Voltage Dips & Interruptions (AC) Voltage Dips & Interruptions (DC) Conducted Emission Radiated Emission Cold Heat Repetitive Shock Non-Repetitive Shock ORDERING INFORMATION 1. Signal On Delay [stn], 2. Cyclic ON/OFF [cnf], 3. Cyclic OFF/ON [cm], 4. Signal OFF Delay [sf], 5. Signal OFF/ON [sfn], 6. Accumulative Delay on Signal [san], 7. Impulse ON/OFF [inf], 8. Leading Edge Impulse [iL], 9. Trailing Edge Impulse [it], 10. Leading Edge Bi-stable [sbi] Rated Voltage (Ue): 120/240 V, Rated Current (Ie): 3.0/1.5 A Rated Voltage (Ue): 24/125/250 V, Rated Current (Ie): 2.0/0.22/0.1 A Green LED -» Power ON, Yellow LED -» Relay ON 240 VAC/DC, Multifunction (10 Modes), 1 C/O, Dark Grey Casing 240 VAC/DC, Multifunction (10 Modes), 1 C/O, Light Grey Casing CONNECTION DIAGRAM TERMINAL TORQUE & CAPACITY

Electronic Timer - Series Micon® 175 When input signal is applied to the timer, the preset delay time period starts. On completion of the preset time, the output is switched ON and remains ON till the input ACCUMULATIVE DELAY When supply power is applied to the timer, the preset delay time period starts. If an input signal is applied to the timer during this period, the preset time stops and resumes only when the input signal is removed. On completion of the preset time, the output is switched ON When supply power is applied to the timer, the output is initially switched ON for the preset time...