Semi-automatic stator tester with open-close split-coil for fast magnetic measurements Measurement results Polarization J [T] The split-coil comprises electrical circuits of the primary and secondary windings connected using copper pins and sockets Magnetic Field Strength H [A/m] The split-coil pins are configured in various combinations of primary/secondary turns for optimized measurements within broad frequency range Integrated air-flux compensation allows testing of wide range of stator sizes Measurements are performed in accordance with international standard IEC 60404-6 Results include absolute magnetic properties such as specific power loss, polarization,magnetic field strength, permeability, etc. Passive gas springs enable easy lifting of split-coil and safety door Caster wheels provide full mobility Compatible with MPG200 measurement unit Stator Tester BST-SA Specific Power Loss Ps (W/kg) JH loops JH magnetization curves

Operating principle The BST-SA tester allows fast, reliable and absolute magnetic measurements of stator cores. The rapid measurement set-up involves three simple steps including positioning of the stator core on retractable tray, sliding the tray with stator into measurement position and closing the split-coil integrated with safety door. The measurement procedure is controlled with the MPG software defining magnetization parameters, testing sequence and signal inputs from different electrical circuits of the split-coil. The measurement results include absolute magnetic properties such as specific...